Project geometry in assemby (A2Plus)
Forum rules
Be nice to others! Read the FreeCAD code of conduct!
Be nice to others! Read the FreeCAD code of conduct!
Project geometry in assemby (A2Plus)
Hi,
I want to project hole from one part to another in A2Plus module. Do you have any ideas how to do it? In attachment there is preview what I want to do
I want to project hole from one part to another in A2Plus module. Do you have any ideas how to do it? In attachment there is preview what I want to do
- Attachments
-
- screen.png (26.53 KiB) Viewed 878 times
Re: Project geometry in assemby (A2Plus)
Sorry I don't get it... maybe there is any video how to do it?
I need to project holes from hinge to plank.
I need to project holes from hinge to plank.
Re: Project geometry in assemby (A2Plus)
Try: PartDesign_ShapeBinder#Example.
A similar solution can be achieved with PartDesign_SubShapeBinder.
A similar solution can be achieved with PartDesign_SubShapeBinder.
Re: Project geometry in assemby (A2Plus)
I tried with PartDesign_SubShapeBinder but with no success. The description of process you wrote is not cleart for me
Re: Project geometry in assemby (A2Plus)
Please explain where you get stuck, and post your model. Note that when using a PartDesign_SubShapeBinder step 11 must be skipped but the rest of the procedure should be the same.
Re: Project geometry in assemby (A2Plus)
In attachemnt there is model with parts. I want to do a hole (or pad in shape of hole) in part withou it (projected from part with hole):
I have error :
Cannot use this command as there is no solid to subtract from.
Ensure that the body contains a feature before attempting a subtractive command.
I have error :
Cannot use this command as there is no solid to subtract from.
Ensure that the body contains a feature before attempting a subtractive command.
- Attachments
-
- assembly.FCStd
- (26.99 KiB) Downloaded 9 times
-
- 2.FCStd
- (13.91 KiB) Downloaded 9 times
-
- 1.FCStd
- (16.17 KiB) Downloaded 7 times
-
- Zrzut ekranu 2022-09-26 o 12.19.17.png (29.31 KiB) Viewed 597 times
Re: Project geometry in assemby (A2Plus)
You have to modify, the individual parts then update them in the assembly.
The error, from before is because there is only a sketch in the body (no solid.)
The error, from before is because there is only a sketch in the body (no solid.)
Re: Project geometry in assemby (A2Plus)
But how to modify indyvidual part? The binder and the new Body with sketch are separated from parts.
- Attachments
-
- Zrzut ekranu 2022-09-26 o 15.54.59.png (104.39 KiB) Viewed 528 times
- adrianinsaval
- Veteran
- Posts: 5553
- Joined: Thu Apr 05, 2018 5:15 pm
Re: Project geometry in assemby (A2Plus)
A2Plus can't do in context editing AFAIK, you have to edit the component separately in it's original file.