[BUG #7872]: Cutting features "up to face" create traces and multiple faces
Forum rules
Be nice to others! Read the FreeCAD code of conduct!
Be nice to others! Read the FreeCAD code of conduct!
[BUG #7872]: Cutting features "up to face" create traces and multiple faces
i noticed that features with option "up to face" are not refined at all, they create traces and multiple faces on body. Following refining and recalculation do nothing.
in the attached example a pocket with made with 25mm depth looks good, the same one "up to face" creates traces and mulptiple faces.. this should not be the intent of feature
in the attached example a pocket with made with 25mm depth looks good, the same one "up to face" creates traces and mulptiple faces.. this should not be the intent of feature
- Attachments
-
- up to face.jpg (176.74 KiB) Viewed 809 times
-
- feature up to face.jpg (181.22 KiB) Viewed 816 times
-
- feature with by dimension.jpg (178.45 KiB) Viewed 816 times
Last edited by Piero69 on Thu Nov 24, 2022 1:59 pm, edited 1 time in total.
Re: [BUG]: Cutting features "up to face" create traces and multiple faces
Set Refine=true for the pocket. This removes the additional seams - which usually do no harm, and only have to be removed for some filleting operations.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: [BUG]: Cutting features "up to face" create traces and multiple faces
it's set to true (see attachment), but refine doesn't look like working. that's why i named [BUG] in the post
Code: Select all
OS: Windows 7 Version 6.1 (Build 7601: SP 1)
Word size of FreeCAD: 64-bit
Version: 0.21.31058 (Git)
Build type: Release
Branch: master
Hash: e6c53d8642af36ce7d738ab6058b063ec58e0859
Python 3.8.13, Qt 5.15.4, Coin 4.0.0, Vtk 9.1.0, OCC 7.6.3
Locale: Italian/Italy (it_IT)
Installed mods:
* 3DfindIT 1.2.0
* A2plus 0.4.54b
* Assembly3 0.11.4
* Assembly4 0.11.8
* Behave-Dark-Colors 0.1.1
* BOLTSFC
* CurvedShapes 1.0.4
* Curves 0.6.1
* dxf_library
* DynamicData 2.46.0
* ExplodedAssembly
* fasteners
* FCGear
* freecad.gears 1.0.0
* ImportNURBS
* InventorLoader 1.3.0
* InventorLoader.backup1663313199.3655012
* invgears 0.1.2
* lattice2
* nurbs
* Render 2022.1.0
* sheetmetal 0.2.59
* sheetmetal.backup1663313192.0420823
* Silk -774766024.0.0
* symbols_library
- Attachments
-
- refine true.jpg (210.96 KiB) Viewed 737 times
Re: [BUG]: Cutting features "up to face" create traces and multiple faces
@chrisb
only if we have a following feature the refining works, otherwise it doesn't and also an exported step is multi-faces and traced (see attachments)
This is not correct, if for many reasons my feature is compulsory the last in a model i get an incorrect outcome.
what do you think?
only if we have a following feature the refining works, otherwise it doesn't and also an exported step is multi-faces and traced (see attachments)
This is not correct, if for many reasons my feature is compulsory the last in a model i get an incorrect outcome.
what do you think?
Code: Select all
OS: Windows 7 Version 6.1 (Build 7601: SP 1)
Word size of FreeCAD: 64-bit
Version: 0.21.31058 (Git)
Build type: Release
Branch: master
Hash: e6c53d8642af36ce7d738ab6058b063ec58e0859
Python 3.8.13, Qt 5.15.4, Coin 4.0.0, Vtk 9.1.0, OCC 7.6.3
Locale: Italian/Italy (it_IT)
Installed mods:
* 3DfindIT 1.2.0
* A2plus 0.4.54b
* Assembly3 0.11.4
* Assembly4 0.11.8
* Behave-Dark-Colors 0.1.1
* BOLTSFC
* CurvedShapes 1.0.4
* Curves 0.6.1
* dxf_library
* DynamicData 2.46.0
* ExplodedAssembly
* fasteners
* FCGear
* freecad.gears 1.0.0
* ImportNURBS
* InventorLoader 1.3.0
* InventorLoader.backup1663313199.3655012
* invgears 0.1.2
* lattice2
* nurbs
* Render 2022.1.0
* sheetmetal 0.2.59
* sheetmetal.backup1663313192.0420823
* Silk -774766024.0.0
* symbols_library
- Attachments
-
- refine up to face.stp
- (29.86 KiB) Downloaded 19 times
-
- refine up to face.FCStd
- (18.17 KiB) Downloaded 19 times
Re: [BUG]: Cutting features "up to face" create traces and multiple faces
The problem seems to be the revolution. If you hover over the bottom, you see that it is not flat in XY-plane.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: [BUG]: Cutting features "up to face" create traces and multiple faces
@chrisb
the problem occurs also working by pad feature instead of revolution, maybe it's not a problem of revolution
the problem occurs also working by pad feature instead of revolution, maybe it's not a problem of revolution
- Attachments
-
- up to face 2.FCStd
- (18.72 KiB) Downloaded 22 times
-
- up to face 2.jpg (178.85 KiB) Viewed 657 times
Re: [BUG]: Cutting features "up to face" create traces and multiple faces
I have seen this before, but not for things in XY plane, so I guessed it was due to rounding/precision issues. It's a pity that up-to-first doesn't work here, because that would also be stable with respect to toponaming issues.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: [BUG #7872]: Cutting features "up to face" create traces and multiple faces
Alone you go faster. Together we go farther
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs