Release discussion 0.15

Have some feature requests, feedback, cool stuff to share, or want to know where FreeCAD is going? This is the place.
Forum rules
Be nice to others! Read the FreeCAD code of conduct!
User avatar
yorik
Site Admin
Posts: 12064
Joined: Tue Feb 17, 2009 9:16 pm
Location: Brussels, Belgium
Contact:

Re: Release discussion 0.15

Postby yorik » Sat Apr 11, 2015 5:30 pm

There are still about 5 downloadsday for "FreeCAD 0.9 Linux" ???? https://sourceforge.net/projects/free-c ... s/timeline That can only be explained by a rare form of masochism...
User avatar
NormandC
Posts: 18534
Joined: Sat Feb 06, 2010 9:52 pm
Location: Québec, Canada

Re: Release discussion 0.15

Postby NormandC » Sat Apr 11, 2015 6:15 pm

yorik wrote:Good idea... I added you as a "developer" to the sourceforge project which - I think - should give you the right to add files. Please check if it works, not sure anymore if this is the correct way...
I don't see anything changed in the FreeCAD project page summary nor in the Files. Should there be a new menu or something?
wmayer
Site Admin
Posts: 16649
Joined: Thu Feb 19, 2009 10:32 am

Re: Release discussion 0.15

Postby wmayer » Sat Apr 11, 2015 6:59 pm

Norm, now you are able to upload files. Just log-in to SF and go to the Files section and the right sub-directory. On the top there is a button "Add file".
User avatar
sgrogan
Posts: 6166
Joined: Wed Oct 22, 2014 5:02 pm

Re: Release discussion 0.15

Postby sgrogan » Sat Apr 11, 2015 7:18 pm

wmayer wrote:Norm, now you are able to upload files. Just log-in to SF and go to the Files section and the right sub-directory. On the top there is a button "Add file".
Also be careful SF will show files when they're not fully unloaded.

If your file is 100 MB it might show 50 MB and it looks like a valid upload. It's just not done.
"fight the good fight"
User avatar
NormandC
Posts: 18534
Joined: Sat Feb 06, 2010 9:52 pm
Location: Québec, Canada

Re: Release discussion 0.15

Postby NormandC » Sat Apr 11, 2015 8:05 pm

Thanks Werner, I just uploaded the DFSG tarball.
sgrogan wrote:If your file is 100 MB it might show 50 MB and it looks like a valid upload.
It shows the complete size (85.3MB), but the icon besides the number of downloads shows a clock icon and the tooltip indicates "Pending..."
User avatar
sgrogan
Posts: 6166
Joined: Wed Oct 22, 2014 5:02 pm

Re: Release discussion 0.15

Postby sgrogan » Sat Apr 11, 2015 8:08 pm

NormandC wrote:It shows the complete size (85.3MB), but the icon besides the number of downloads shows a clock icon and the tooltip indicates "Pending..."
Once again Linux wins. I get no such warning.
"fight the good fight"
User avatar
NormandC
Posts: 18534
Joined: Sat Feb 06, 2010 9:52 pm
Location: Québec, Canada

Re: Release discussion 0.15

Postby NormandC » Sat Apr 11, 2015 8:22 pm

Or maybe it's simply because the upload was pretty quick (less than 13 seconds). I have a 50/50MBits connexion. ;)
User avatar
saso
Posts: 1586
Joined: Fri May 16, 2014 1:14 pm
Contact:

Re: Release discussion 0.15

Postby saso » Sun Apr 12, 2015 10:33 pm

I don't have as much free time lately as I would like to, but anyway everything worked as expected with the little bit of testing on release candidates that I did, so I did not really had anything to report. Great work and thanks to everyone for making it!

One small thing I noticed a day or two ago that might be helpful to some users with the same situation. On an Vista x64 machine I had to install the x86 FC version, because the x64 version of FC was giving me errors that an DLL could not be loaded any time I opened any WB.
wmayer
Site Admin
Posts: 16649
Joined: Thu Feb 19, 2009 10:32 am

Re: Release discussion 0.15

Postby wmayer » Mon Apr 13, 2015 8:17 am

On an Vista x64 machine I had to install the x86 FC version, because the x64 version of FC was giving me errors that an DLL could not be loaded any time I opened any WB.
And could you figure out which DLL it is?
User avatar
r-frank
Posts: 2181
Joined: Thu Jan 24, 2013 6:26 pm
Location: Möckmühl, Germany
Contact:

Re: Release discussion 0.15

Postby r-frank » Mon Apr 13, 2015 10:42 am

Just found out that there is one more thing to do.
On the Mantis Bug Tracker you should be able to choose 0.15 as version when reporting issues.

ATM 0.14 is the Maximum.

Roland
Deutsche FreeCAD Tutorials auf Youtube
My GrabCAD FreeCAD-Projects
FreeCAD lessons for beginners in english

Native german speaker - so apologies for my english, no offense intended :)