ShipTools Workbench
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
Re: ShipTools Workbench
Hi,
I am now busy with the Basic Design sub module. The Project Setup/Concept and Detail Design sub module are already made and has to be tested in 1 real simple section.
Jos
I am now busy with the Basic Design sub module. The Project Setup/Concept and Detail Design sub module are already made and has to be tested in 1 real simple section.
Jos
- Attachments
-
- Basic Design
- bsdstructure.png (428.51 KiB) Viewed 5153 times
"Stop whining, get up and help yourself"
"Hör auf zu jammern, steh auf und hilf dir selbst"
"Stop met zeuren, sta op en help jezelf"
Progress videos of the WB:
https://m.youtube.com/channel/UCFRTPtm92UMXGfh__jsA3dg
"Hör auf zu jammern, steh auf und hilf dir selbst"
"Stop met zeuren, sta op en help jezelf"
Progress videos of the WB:
https://m.youtube.com/channel/UCFRTPtm92UMXGfh__jsA3dg
Re: ShipTools Workbench
Beautiful.
That is good to mesh with shell element.
That is good to mesh with shell element.
Re: ShipTools Workbench
Hi John,
Yes, the sheets should be divided where it connects with other sheets. Any other points to consider so I can put into my features?
Jos
Yes, the sheets should be divided where it connects with other sheets. Any other points to consider so I can put into my features?
Jos
"Stop whining, get up and help yourself"
"Hör auf zu jammern, steh auf und hilf dir selbst"
"Stop met zeuren, sta op en help jezelf"
Progress videos of the WB:
https://m.youtube.com/channel/UCFRTPtm92UMXGfh__jsA3dg
"Hör auf zu jammern, steh auf und hilf dir selbst"
"Stop met zeuren, sta op en help jezelf"
Progress videos of the WB:
https://m.youtube.com/channel/UCFRTPtm92UMXGfh__jsA3dg
-
- Posts: 27
- Joined: Fri Oct 08, 2021 9:21 pm
Re: ShipTools Workbench
Jos, looks already great!
There might be also some potential to produce shell elements for roofs and similar.
So keep up with work on this nice workbench!
There might be also some potential to produce shell elements for roofs and similar.
So keep up with work on this nice workbench!
Re: ShipTools Workbench
This looks very cool!
I would love to create structures of a Machine Room block and tryout to combine it with the "Dodo" Piping workbench to fill it with life.
Please continue with this promissing Workbench!
Best Regard
Phil
I would love to create structures of a Machine Room block and tryout to combine it with the "Dodo" Piping workbench to fill it with life.
Please continue with this promissing Workbench!
Best Regard
Phil
Re: ShipTools Workbench
Hi weebee13,
It is amassing your task. Hope soon will be a FreeCad Work-Bench.
I hope too you can solve the Ship Workbench problem, which is very, very slow on a normal computer.
Thanks a lot and keep going in your project!
It is amassing your task. Hope soon will be a FreeCad Work-Bench.
I hope too you can solve the Ship Workbench problem, which is very, very slow on a normal computer.
Thanks a lot and keep going in your project!
Re: ShipTools Workbench
@All: thanks
Another feature was created during my test. I came across during creating and reviewing the workflow that it would be handy if I can create a transverse frame including the holes plus extra attribute then copy paste it through the frames of interest. By doing so, I can save some feature operations also time. New copies can be handled individually. Change the hole distance or amount or the type of that hole. This happens often with me during testing when I arise the questions, could it be better and easier for me. Then I think about it and make the solution. Very addicting!
For details of this feature please see the video on youtube.
Btw, I am not the creator of the Ship WB. Please contact Jose or help him to improve his WB.
Jos
Another feature was created during my test. I came across during creating and reviewing the workflow that it would be handy if I can create a transverse frame including the holes plus extra attribute then copy paste it through the frames of interest. By doing so, I can save some feature operations also time. New copies can be handled individually. Change the hole distance or amount or the type of that hole. This happens often with me during testing when I arise the questions, could it be better and easier for me. Then I think about it and make the solution. Very addicting!
For details of this feature please see the video on youtube.
Btw, I am not the creator of the Ship WB. Please contact Jose or help him to improve his WB.
Jos
- Attachments
-
- Copying frame features
- Screenshot from 2021-11-28 10-16-28.png (172.8 KiB) Viewed 4234 times
"Stop whining, get up and help yourself"
"Hör auf zu jammern, steh auf und hilf dir selbst"
"Stop met zeuren, sta op en help jezelf"
Progress videos of the WB:
https://m.youtube.com/channel/UCFRTPtm92UMXGfh__jsA3dg
"Hör auf zu jammern, steh auf und hilf dir selbst"
"Stop met zeuren, sta op en help jezelf"
Progress videos of the WB:
https://m.youtube.com/channel/UCFRTPtm92UMXGfh__jsA3dg
Re: ShipTools Workbench
Lay down all work until next year, but I can"t promise myself. Have a pleasent days and keep healthy!
- Attachments
-
- 20211223_045017.jpg (81.31 KiB) Viewed 3662 times
"Stop whining, get up and help yourself"
"Hör auf zu jammern, steh auf und hilf dir selbst"
"Stop met zeuren, sta op en help jezelf"
Progress videos of the WB:
https://m.youtube.com/channel/UCFRTPtm92UMXGfh__jsA3dg
"Hör auf zu jammern, steh auf und hilf dir selbst"
"Stop met zeuren, sta op en help jezelf"
Progress videos of the WB:
https://m.youtube.com/channel/UCFRTPtm92UMXGfh__jsA3dg
Re: ShipTools Workbench
@Jos,
How to install this ShipTools WB?
How to install this ShipTools WB?
Re: ShipTools Workbench
Impressive work!
Support me on Patreon: https://www.patreon.com/FreeCadDevDiary
FreeCad Dev Diary channel:[/b] https://www.youtube.com/channel/UCGMTmJ ... NiPSSEhBHA
FreeCad Dev Diary channel:[/b] https://www.youtube.com/channel/UCGMTmJ ... NiPSSEhBHA