TechDraw Balloons

Info about new community or project announcements, implemented features, classes, modules or APIs. Might get technical!
User avatar
Posts: 5933
Joined: Thu Jan 05, 2017 9:03 pm

Re: TechDraw Balloons

Postby Kunda1 » Fri Sep 13, 2019 1:22 am

Did this get mentioned in the 0.19 release notes ?
Want to contribute back to FC? Checkout:
#lowhangingfruit | Use the Source, Luke. | How to Help FreeCAD | How to report FC bugs and features
Posts: 19607
Joined: Tue Mar 17, 2015 9:14 am

Re: TechDraw Balloons

Postby chrisb » Fri Sep 13, 2019 2:09 am

liutas4x4 wrote:
Thu Sep 12, 2019 6:21 pm
triplus wrote:
Wed Apr 03, 2019 10:15 pm
P.S. I used to add them in Inkscape. ;)
Mee too. It is the best way for now.
I don't think so at all. The best way for me is to use balloons directly in FreeCAD. Easy to handle, looking great, what else can be expected?
Posts: 61
Joined: Sat Jul 16, 2016 9:16 am

Re: TechDraw Balloons

Postby liutas4x4 » Fri Sep 13, 2019 8:23 am

I am not speaking about balloons only. It is about all graphics, about total editing of drawings.
Sorry to mention it, but FC drawings are looking too non-pro for now.
Old DrawingDimentioning WB was far better. But even after DD WB there were a lot of corrections in second graphic editor.

Hope it will be better one day )))

Posts: 8796
Joined: Mon Dec 12, 2011 4:45 pm

Re: TechDraw Balloons

Postby triplus » Wed Sep 25, 2019 4:20 pm

liutas4x4 wrote:
Thu Sep 12, 2019 6:21 pm
Mee too. It is the best way for now.
The truth is things have substantially improved, over the last couple of years. An average technical drawing should now be doable in FreeCAD, not requiring much post-processing in external software at all. I have just noticed:

All in all, from drawing templates, different types of views, dimensions, hatching, balloons, welding symbols, tolerances, tables, standards compliance ... Huge improvements all over.