Help test FreeCAD for Mac

[brusk]

If you quote someone it gives then a notification. If you click Quote before opening a reply in this forum, you get a reply open with the entire post quoted. If you want to do a partial quote, open the reply window first by clicking reply, then highlight the part you want to quote and then click "quote" and it will give you a properly referenced partial quote and notify the original poster. You can create an unreferenced or plain quote by just clicking quote from the reply window when nothing is highlighted, usually that is bad practice because it does not notify the original poster and makes a conversation hard to follow as you have to try to work out who is being quoted, but there are times where it is useful.

Thanks for the thorough explanation .

[olof]

Hi,

Thanks for all the hard work getting FreeCAD working on the MAC. Everything works ok for me apart from the Drawing workbench. When creating a drawing on the mac version I see what look like previews of other tabs that are open (apart from the start page). A screen shot is below:

mac_drawing_error.png (98.96 KiB) Viewed 1041 times

Thanks,

Rowan

OS X version: 10.9.5

OS: Mac OS X
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.16.6452 (Git)
Build type: Release
Branch: tag: 0.16_pre-osx
Hash: 6b11fd9e8be45cd89f2f8873752910b06782d2ae
Python version: 2.7.11
Qt version: 4.8.7
Coin version: 3.1.3
OCC version: 6.8.0.oce-0.17

[ickby]

Hello,

this is a known issue that will remain until we port to QT5. Efforts for this already startet, but will most likely not be finished in short time.

[olof]

Hi ickby,

Thanks for letting me know. I look forward to the update when that happens.

[nemesis]

Hello!
if Some Mac user can test it :
viewtopic.php?f=3&t=15215

just to know if it's a real drawback from OCC version, or if it's a problem from my configuration or file.

thanks

[llyodsinfrasystems]

Is there any way to get more details about which exception it is?

[vejmarie]

Will try to have a look tomorrow. My Mac is currently meshing a very huge part. I can at least test with OCCT 7