I think I found a Drawback on the OS X released build,
OSX information :
OS: Mac OS X
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.16.6698 (Git)
Build type: Release
Branch: (detached from ca7c5d3)
Hash: ca7c5d31a4d61f32a25b71025b14641a6e378328
Python version: 2.7.11
Qt version: 4.8.7
Coin version: 3.1.3
OCC version: 6.8.0.oce-0.17
Debian information (on a virtual machine in vrtualbox) :
deb from here
OS: Debian GNU/Linux 8.4 (jessie)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.16.6688 (Git)
Build type: None
Branch: master
Hash: 7ee0afbf7ac26dadb391e277a9ce278e3c4bee4c
Python version: 2.7.9
Qt version: 4.8.6
Coin version: 4.0.0a
OCC version: 6.7.0
I know this is not exactly the same commit, my concern is that the OS X one is the more recent (and supposed to be the released one)
the file I used is available here
when I try to modify the las Fillet, the modification seams Ok, but after 2 or 3 seconds free cad freeze. doesn't happen in Debian.
by the way, I started the design of this part on OS X 0.16 6692 (git) and just updated to the last version yesterday (As I saw a Release version)
so I use the "freecad -l" and here is the result :
Code: Select all
FreeCAD 0.16, Libs: 0.16R6698 (Git)
© Juergen Riegel, Werner Mayer, Yorik van Havre 2001-2015
##### #### ### ####
# # # # # #
# ## #### #### # # # # #
#### # # # # # # # ##### # #
# # #### #### # # # # #
# # # # # # # # # ## ## ##
# # #### #### ### # # #### ## ## ##
Fasteners workbench Loaded
2016-04-10 14:30:52.511 FreeCAD[4961:220516] modalSession has been exited prematurely - check for a reentrant call to endModalSession:
2016-04-10 14:30:53.407 FreeCAD[4961:220516] modalSession has been exited prematurely - check for a reentrant call to endModalSession:
2016-04-10 14:30:54.462 FreeCAD[4961:220516] modalSession has been exited prematurely - check for a reentrant call to endModalSession:
Coin warning in cc_glglue_instance(): Error when setting up the GL context. This can happen if there is no current context, or if the context has been set up incorrectly.
*** Abort *** an exception was raised, but no catch was found.
... The exception is:SIGSEGV 'segmentation violation' detected. Address 0