thanks a lot!!!HSig wrote: Hi Maurice, just made a simple screencast-tutorial, thermal deflection of a L-beam.
You find it here: https://youtu.be/Fy9VZuLm9FI
Very helpful
Moderator: bernd
thanks a lot!!!HSig wrote: Hi Maurice, just made a simple screencast-tutorial, thermal deflection of a L-beam.
You find it here: https://youtu.be/Fy9VZuLm9FI
Hi HSig and welcome to FreeCAD forum. Great to see user count off FEM wb growing! Thanks for sharing the video!HSig wrote:Hi Maurice, just made a simple screencast-tutorial, thermal deflection of a L-beam.
You find it here: https://youtu.be/Fy9VZuLm9FI
You are right ... https://github.com/FreeCAD/FreeCAD/blob ... cx.py#L106 and the following lines. I'll go a for a pull request tonight.makkemal wrote:In current master force and pressure loads are not included when selecting Thermo-mechanical analysis.
If Applied they should be included in the input deck. Everthing that is used in static can be used in Thermo-mechanical
Minor problem which can have some big results problemsYou are right ... https://github.com/FreeCAD/FreeCAD/blob ... cx.py#L106 and the following lines. I'll go a for a pull request tonight.