This is my first post here. I've been following the Path development for a while now and I want to thank everyone involved. I find this workbench already usable with my simple milling tasks! I updated to the latest git master yesterday (last one was from month ago or something) and noticed that the old holding tags options were gone from the profile and it was replaced by the new dressup. The dressup was nice, the automatic generation worked nicely. However, when I post processed the dressup, I noticed that feedrates set by the tool controller were ignored. I'm using linuxcnc post processor. Is there something I missed from settings or is this some sorta bug? BTW, I tried registering to Freecad bug tracker, but failed to see the visual captcha image. Again am I doing something wrong or is there issues with the tracker? I see it issues some PHP warning about timezone..
Thanks for help,
Pekka
Original gcode from Profile:
Code: Select all
(Profile001 :TC001)
(Compensated Tool Path. Diameter: 6.5)
G0 F0.000000 Z13.000000
G00 X4.700000 Y16.300000
G00 Z18.000000
G01 F200.000000 X4.700000 Y16.300000 Z5.500000
G01 F400.000000 X4.700000 Y-8.449000 Z5.500000
G03 F400.000000 I3.249000 J0.000000 X7.949000 Y-11.699000 Z5.500000
...
Code: Select all
G0 X0.000000 Y0.000000 Z13.000000
G0 X4.700000 Y16.300000 Z13.000000
G0 X4.700000 Y16.300000 Z18.000000
G1 X4.700000 Y16.300000 Z5.500000
G1 X4.700000 Y-8.449000 Z5.500000
G3 I3.250708 J0.000708 K0.000000 X7.949000 Y-11.699000 Z5.500000
...
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.17.9933 (Git)
Build type: Unknown
Branch: master
Hash: 6c3b78e97bbb8653e1189038c99682becef71626
Python version: 2.7.9
Qt version: 4.8.6
Coin version: 4.0.0a
OCC version: 6.7.0