BOLTS Open Library of Technical Specifications
Forum rules
Be nice to others! Read the FreeCAD code of conduct!
Be nice to others! Read the FreeCAD code of conduct!
Re: BOLTS Open Library of Technical Specifications
Is it an idea that one (or more) from the FreeCAD forum have acces to BOLTS to maintain it without inter action of @JReinhardt ??
Re: BOLTS Open Library of Technical Specifications
read the issue. https://github.com/FreeCAD/FreeCAD-addons/issues/38 I have set up a gitrepo with a working BOLTS pachage for FreeCAD. I will try to get in touch with Johannes in this regard. He may will come up by one self because he will get informed about the posts on this topic. Just be patient.
Bernd
- davecoventry
- Posts: 286
- Joined: Mon Dec 09, 2013 8:11 pm
- Location: Johannesburg
- Contact:
Re: BOLTS Open Library of Technical Specifications
I have a Virtual Box VM running Windows XP and I've installed FreeCAD there.
The Bolts Library runs fine there.
I've recently upgraded to Debian 9, but the macro fails as described above.
The Bolts Library runs fine there.
I've recently upgraded to Debian 9, but the macro fails as described above.
~ Dave
Re: BOLTS Open Library of Technical Specifications
installing BOLTS by the use of FreeCAD installer should work again. If encounter any problems by the use of BOLTS from addon manager please post them here.
for reference:
https://github.com/FreeCAD/FreeCAD-addons/commit/cca3df
just tested the BOLTS from AddOn manager on my debin jessy with
OS: Debian GNU/Linux 8.9 (jessie)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.17.12148 (Git)
Build type: Debug
Branch: master
Hash: be18a46df9927a81fcbca7e19b2b28497d2779b8
Python version: 2.7.9
Qt version: 4.8.6
Coin version: 4.0.0a
OCC version: 7.0.0
Locale: German/Switzerland (de_CH)
Installes fine and runs without any problems so far
bernd
for reference:
https://github.com/FreeCAD/FreeCAD-addons/commit/cca3df
just tested the BOLTS from AddOn manager on my debin jessy with
OS: Debian GNU/Linux 8.9 (jessie)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.17.12148 (Git)
Build type: Debug
Branch: master
Hash: be18a46df9927a81fcbca7e19b2b28497d2779b8
Python version: 2.7.9
Qt version: 4.8.6
Coin version: 4.0.0a
OCC version: 7.0.0
Locale: German/Switzerland (de_CH)
Installes fine and runs without any problems so far
bernd
Re: BOLTS Open Library of Technical Specifications
Hello
I am quite new to freecad and very new to the bolts-library.
Now I installed bolts on my freecad 0.16 on an ubuntu system.
I can access the library and add parts. everything fine.
when i select a bearing 6005-ZZ it should have d=25,D=47 and B=12
the added bearing in freecad only is 6mm thick instead of 12mm
In the bearings-table on bolts-library.org the 6005-ZZ has the thickness correcly with 12mm
same problem with other bearings e.g. 608-ZZ (only 3.5 mm instead of 7mm)
always the freecad-thickness only seems to be half of the original
any idea?
thanks
cremofix
I am quite new to freecad and very new to the bolts-library.
Now I installed bolts on my freecad 0.16 on an ubuntu system.
I can access the library and add parts. everything fine.
when i select a bearing 6005-ZZ it should have d=25,D=47 and B=12
the added bearing in freecad only is 6mm thick instead of 12mm
In the bearings-table on bolts-library.org the 6005-ZZ has the thickness correcly with 12mm
same problem with other bearings e.g. 608-ZZ (only 3.5 mm instead of 7mm)
always the freecad-thickness only seems to be half of the original
any idea?
thanks
cremofix
Re: BOLTS Open Library of Technical Specifications
For me it is 12 mm, but I may added the wrong one. Could you exact say which bearing did you add ...
bernd
bernd
-
- Veteran
- Posts: 3156
- Joined: Sat May 20, 2017 12:06 pm
- Location: Germany
Re: BOLTS Open Library of Technical Specifications
EDIT: ups, just before I was in the german forum...
Error when loading rectangular hollow profile from BOLTSFC
in FC0.16. I-Profile works. Loding rectangualr hollow
in FC0.17 is ok.
@Bernd:
Error beim Laden von Q-Rohr in FC0.16, I-Träger funktioniert.
Q-Rohr laden funktioniert aber in FC0.17.
Thomas
Error when loading rectangular hollow profile from BOLTSFC
in FC0.16. I-Profile works. Loding rectangualr hollow
in FC0.17 is ok.
@Bernd:
Error beim Laden von Q-Rohr in FC0.16, I-Träger funktioniert.
Q-Rohr laden funktioniert aber in FC0.17.
Thomas
Re: BOLTS Open Library of Technical Specifications
the Part::FaceMakerBullseye seams not supported by FreeCAD 0.16 https://github.com/berndhahnebach/BOLTS ... 5f7b85f888 I will have a look ...