See 1st 2 screen captures - single out 'problem' as follows.
Workflow resulted in Incorrect Opening Position
- Make a rectangular Sketch e.g.
- Build a wall out of it
- Move / rotate the wall to a position as desirable (Not the underlying sketch)
- Make a Window/Door "in the air' say 0,0,0 (learned from Yorik to work better on a few cases)
- Move the Win/Door (not the underlying sketch) to the wall as desirable
- Add the Win/Door to the Walls as Host (used Host property in Win/Door object)
Now, the opening is found not in Correct position but always shifted somehow
EDIT: Quite 'arbitrarily', can't find a regular pattern of the 'shift'...
I think this workflow is quite 'ordinary', just some sketch, translation ...
Trying to find 'correct' workflow to avoid the 'bug' with following finding.
See 3rd & 4th screen captures.
- Make a rectangular Sketch e.g.
- Build a wall out of it
- Move / rotate the Underlying Sketch instead of the Wall Object to a position as desirable
- Make a Window/Door "in the air' say 0,0,0 (learned from Yorik to work better on a few cases)
- Move the Win/Door (not the underlying sketch) to the wall as desirable
- Add the Win/Door to the Walls as Host (used Host property in Win/Door object)
Opening is in correct position!
So, it seem need to move its underlying Sketch to move Wall? (This 'limitation' does not apply on the Win/Door underlying sketch)
Thanks for any idea!