Workbench BOLTSFC installed but no menue
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
Workbench BOLTSFC installed but no menue
hello,
i installed in fc 0.18 using tne addon-manager the workbench extesion "boltsfc" but i can not find any more workbench. what am i doing wrong ? how to use boltsfc ?? in the addonmanager the green check is set.
thanks a lot
w
i installed in fc 0.18 using tne addon-manager the workbench extesion "boltsfc" but i can not find any more workbench. what am i doing wrong ? how to use boltsfc ?? in the addonmanager the green check is set.
thanks a lot
w
Re: Workbench BOLTSFC installed but no menue
Did you restart FreeCAD? Additional workbenches are not visible before restarting.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Workbench BOLTSFC installed but no menue
yes, i restarted
Re: Workbench BOLTSFC installed but no menue
Do you have some other additional workbench that works? If not, can you try installing Fasteners?
And please add your full FreeCAD info.
And please add your full FreeCAD info.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Workbench BOLTSFC installed but no menue
thanks for tip with fasteners, i installed, restarted and the new workbench in there, now i have a first look to this....
best regards
my version:
OS: Ubuntu 16.04.4 LTS
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.18.13712 (Git)
Build type: None
Branch: master
Hash: 57b7f3389a846454d01c2abea509b8394099735c
Python version: 2.7.12
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 7.2.0
Locale: German/Germany (de_DE)
best regards
my version:
OS: Ubuntu 16.04.4 LTS
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.18.13712 (Git)
Build type: None
Branch: master
Hash: 57b7f3389a846454d01c2abea509b8394099735c
Python version: 2.7.12
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 7.2.0
Locale: German/Germany (de_DE)
Re: Workbench BOLTSFC installed but no menue
BOLTSFC is not a wb it is a macro. You should have a macro called start bolts.
Re: Workbench BOLTSFC installed but no menue
hi bernd,
thanks for info but...
i searched start bolts macro but could not find. not in the macro menu in the list and not in addonmanager in the macro tab see pictures (system-tab is empty)
today my preview is out of order, i can see more than my 2 attached pictures but i removed in the textbox...
thanks for info but...
i searched start bolts macro but could not find. not in the macro menu in the list and not in addonmanager in the macro tab see pictures (system-tab is empty)
today my preview is out of order, i can see more than my 2 attached pictures but i removed in the textbox...
- Attachments
-
- f2.png (57.32 KiB) Viewed 3040 times
-
- f1.png (48.74 KiB) Viewed 3040 times
Re: Workbench BOLTSFC installed but no menue
A bit late but since you get an email you may read this anyway.
If you install BOLTSFC by the addon manager wait some time ... may be 5 minutes. It will not tell you it is successful installed, but it will copy it anyway. Open a Python Console in FreeCAD and put in If you get no error message BOLTS is installed.
Afterwards go to your FreeCAD Mod directory. There should be a file called "start_bolts.FCMacro inside the BOLTSFC directory. Move this file into your macro folder. Run this macro to start BOLTS.
bernd
for reference: https://github.com/FreeCAD/FreeCAD-addons/issues/102
If you install BOLTSFC by the addon manager wait some time ... may be 5 minutes. It will not tell you it is successful installed, but it will copy it anyway. Open a Python Console in FreeCAD and put in
Code: Select all
import BOLTS
Afterwards go to your FreeCAD Mod directory. There should be a file called "start_bolts.FCMacro inside the BOLTSFC directory. Move this file into your macro folder. Run this macro to start BOLTS.
bernd
for reference: https://github.com/FreeCAD/FreeCAD-addons/issues/102
Re: Workbench BOLTSFC installed but no menue
OS: Windows 7
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.18.16110 (Git)
Build type: Release
Branch: (HEAD detached at upstream/releases/FreeCAD-0-18)
Hash: f7dccfaa909e5b9da26bf50c4a22ccca9bb10c40
Python version: 3.6.6
Qt version: 5.6.2
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: German/Germany (de_DE)
I tried the phyton command and get this:
Addon Manager says addon is installed.
I also copied the files into the macro dir, that did not helped.
Link to Bolts at Github:
https://github.com/MindScraper/BOLTS-Op ... shers-...-
Someone can read & identify the problem in the phyton error mesages?
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.18.16110 (Git)
Build type: Release
Branch: (HEAD detached at upstream/releases/FreeCAD-0-18)
Hash: f7dccfaa909e5b9da26bf50c4a22ccca9bb10c40
Python version: 3.6.6
Qt version: 5.6.2
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: German/Germany (de_DE)
I tried the phyton command and get this:
I got same messages when I execute the macro in normal way.>>> import BOLTS
Traceback (most recent call last):
File "<input>", line 1, in <module>
File "C:\Users\DANIEL\AppData\Roaming\FreeCAD\Mod\BOLTSFC\BOLTS\__init__.py", line 40, in <module>
from .gui import freecad_bolts as boltsgui
File "C:\Users\DANIEL\AppData\Roaming\FreeCAD\Mod\BOLTSFC\BOLTS\gui\freecad_bolts.py", line 29, in <module>
Ui_BoltsWidget,QBoltsWidget = uic.loadUiType(join(bolts_path,'bolts_widget.ui'))
File "<string>", line 15
exec pyc in frame
^
SyntaxError: Missing parentheses in call to 'exec'
>>>
Addon Manager says addon is installed.
I also copied the files into the macro dir, that did not helped.
Link to Bolts at Github:
https://github.com/MindScraper/BOLTS-Op ... shers-...-
Someone can read & identify the problem in the phyton error mesages?
Re: Workbench BOLTSFC installed but no menue
you need 0.18.2 which is 0.18.16117
The problem was fixed with https://github.com/FreeCAD/FreeCAD/comm ... 3749771eea If you are interested: https://forum.freecadweb.org/viewtopic. ... 86#p306308
The problem was fixed with https://github.com/FreeCAD/FreeCAD/comm ... 3749771eea If you are interested: https://forum.freecadweb.org/viewtopic. ... 86#p306308