Boolean-Fragments as Boolean operation in PDN

About the development of the Part Design module/workbench. PLEASE DO NOT POST HELP REQUESTS HERE!
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
chrisb
Veteran
Posts: 53920
Joined: Tue Mar 17, 2015 9:14 am

Re: Boolean-Fragments as Boolean operation in PDN

Post by chrisb »

I don't see at the moment the benefit of switching workbenches. Why don't you model the complete nut in one body?
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
user1234
Veteran
Posts: 3332
Joined: Mon Jul 11, 2016 5:08 pm

Re: Boolean-Fragments as Boolean operation in PDN

Post by user1234 »

This is the problem, CompSolids are not available in the PartDesign Workbench. So i have to swich to the Part Worckbench (and mix it). And the Parts i make are much easier to construct in PartDesign (mechanical engineering).

Greetings
user1234
User avatar
NormandC
Veteran
Posts: 18587
Joined: Sat Feb 06, 2010 9:52 pm
Location: Québec, Canada

Re: Boolean-Fragments as Boolean operation in PDN

Post by NormandC »

It's simple: PartDesign does not support multiple solids. There is nobody willing to work on this. It might take a long time (years possibly) before that changes.

Here are some explanations on the subject, you'll need to use a translation service to translate it from German. https://forum.freecadweb.org/viewtopic. ... 40#p198094
Post Reply