3D modeling videos in FreeCAD 0.17

A place to share learning material: written tutorials, videos, etc.
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Post Reply
AllVisuals4U
Posts: 13
Joined: Sat Jul 22, 2017 2:18 pm
Contact:

3D modeling videos in FreeCAD 0.17

Post by AllVisuals4U »

Hello FreeCAD users!

Last week I started with livestreaming FreeCAD 0.17 videos.
The videos about the Part Design Workbench and Sketcher Workbench are online:

https://youtu.be/MW75e-AXKyE
https://youtu.be/JNEyN66eFsQ

I just model around while i'm livestreaming on YouTube and maybe you can learn something from it.
There's no speech, only some music if i added it.

After thinking about it, i think i won't livestream anymore, but record 3D modeling videos which show how to draw a specific product.
Last edited by AllVisuals4U on Sun Jul 01, 2018 9:43 am, edited 2 times in total.
AllVisuals4U
Learn To Design | 3D Printing, Design & Lifehacks
YouTube https://youtube.com/AllVisuals4U
LBRY https://lbry.tv/@AllVisuals4U:7
BitTube https://bittube.tv/profile/AllVisuals4U
chrisb
Veteran
Posts: 53920
Joined: Tue Mar 17, 2015 9:14 am

Re: FreeCAD 0.17 LIVESTREAMS

Post by chrisb »

I have to confess that I stopped watching the first video after less than 3 minutes because I had to watch for almost one minute your mostly unsuccessful attempts to apply a symmetry constraint - which on top of shouldn't be applied in that way, because you create an overconstraint sketch in the version you use. This will most probably lead to unpredictable problems in further steps. You should apply symmetry to the corners instead.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
AllVisuals4U
Posts: 13
Joined: Sat Jul 22, 2017 2:18 pm
Contact:

Re: FreeCAD 0.17 LIVESTREAMS

Post by AllVisuals4U »

The origin planes obstructed the selection, it took much longer than i thought it was ;-) Thanks for the feedback!
This was my first livestream, i'll avoid failed actions in the future. 8-)
AllVisuals4U
Learn To Design | 3D Printing, Design & Lifehacks
YouTube https://youtube.com/AllVisuals4U
LBRY https://lbry.tv/@AllVisuals4U:7
BitTube https://bittube.tv/profile/AllVisuals4U
GeneFC
Veteran
Posts: 5373
Joined: Sat Mar 19, 2016 3:36 pm
Location: Punta Gorda, FL

Re: FreeCAD 0.17 LIVESTREAMS

Post by GeneFC »

I don't livestream anything, but I realize some people do.

However, when it comes to something technical, such as FreeCAD, it seems much better to have rehearsed and/or edited tutorials.

Gene
AllVisuals4U
Posts: 13
Joined: Sat Jul 22, 2017 2:18 pm
Contact:

Re: 3D modeling videos in FreeCAD 0.17

Post by AllVisuals4U »

I made a bunch of step by step 3D modeling tutorials:

Latest video:
https://youtu.be/BL-zpOtTwGE

Playlist:
https://www.youtube.com/playlist?list=P ... p5-kgnTifN
AllVisuals4U
Learn To Design | 3D Printing, Design & Lifehacks
YouTube https://youtube.com/AllVisuals4U
LBRY https://lbry.tv/@AllVisuals4U:7
BitTube https://bittube.tv/profile/AllVisuals4U
Celica_Supra

Re: 3D modeling videos in FreeCAD 0.17

Post by Celica_Supra »

AllVisuals4U wrote: Sat Nov 03, 2018 2:46 pm I made a bunch of step by step 3D modeling tutorials:

Latest video:
https://youtu.be/BL-zpOtTwGE

Playlist:
https://www.youtube.com/playlist?list=P ... p5-kgnTifN
I really like your channel. Subscribed
dima8101
Posts: 18
Joined: Thu May 04, 2017 10:03 am

Re: 3D modeling videos in FreeCAD 0.17

Post by dima8101 »

Axes in freecad for beginner )
Image
User avatar
hammax
Veteran
Posts: 1985
Joined: Thu Jan 19, 2017 5:03 pm
Location: Ammersee DE

Re: 3D modeling videos in FreeCAD 0.17

Post by hammax »

...hello dima
Here some derivation of your axis-picture as a mnemonic for numpad and Euler angles.
Attachments
RollPitchY_2.FCStd
FC.18.15536
(122.7 KiB) Downloaded 79 times
Axes_2.png
Axes_2.png (134.34 KiB) Viewed 2933 times
Post Reply