Installation problems
Moderator: oliveroxtoby
Forum rules
and Helpful information for the FEM forum
and Helpful information for the FEM forum
Re: Installation problems
Problem update.
I tried same installation on a stand alone PC and got same problem.
I was able to install cfMesh only restarting windows in safe mode.
I tried same installation on a stand alone PC and got same problem.
I was able to install cfMesh only restarting windows in safe mode.
- oliveroxtoby
- Posts: 814
- Joined: Fri Dec 23, 2016 9:43 am
- Location: South Africa
Re: Installation problems
Thanks a lot for the information.
I tried an installation on my wife's Windows 10 machine but was unable to reproduce the problem there
I'm not able to come up with any ideas as to what could be at fault.
Are you able to reproduce this problem easily, or does it no longer occur now that you have got it installed in safe mode? If you can reproduce, I could try adding some debugging information and ask you to run it on your system to give us some hints.
Please provide all the information requested in this post before reporting problems with CfdOF.
Re: Installation problems
I ' ll try it and post here any update.oliveroxtoby wrote: ↑Sun Jun 24, 2018 1:07 pm Are you able to reproduce this problem easily, or does it no longer occur now that you have got it installed in safe mode? If you can reproduce, I could try adding some debugging information and ask you to run it on your system to give us some hints.
Re: Installation problems
I tried a new installation.
- hard disk reformatted
- installed last Windows release (Windows 10 Pro 64 bit, version 1803).
- installed FeeeCAD 0.17 revision 13522
- installed CFD
no problems detected.
- hard disk reformatted
- installed last Windows release (Windows 10 Pro 64 bit, version 1803).
- installed FeeeCAD 0.17 revision 13522
- installed CFD
no problems detected.
- oliveroxtoby
- Posts: 814
- Joined: Fri Dec 23, 2016 9:43 am
- Location: South Africa
Re: Installation problems
Thank you very much for going to all that effort! I guess we'll have to see if anyone else reports the problem, and see if we can gather any more info from them...
Please provide all the information requested in this post before reporting problems with CfdOF.
-
- Veteran
- Posts: 3132
- Joined: Sat May 20, 2017 12:06 pm
- Location: Germany
Re: Installation problems
Hi,
just updated the cfd-of-wb with addon-manager.
When activating the wb, I get an error.
system:
OS: Windows 10
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.18.14098 (Git)
Build type: Release
Branch: master
Hash: 0c33d00bfdf8270e7e5b33d792bf0ad9bbbfc819
Python version: 2.7.14
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 7.2.0
Locale: German/Germany (de_DE)
just updated the cfd-of-wb with addon-manager.
When activating the wb, I get an error.
system:
OS: Windows 10
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.18.14098 (Git)
Build type: Release
Branch: master
Hash: 0c33d00bfdf8270e7e5b33d792bf0ad9bbbfc819
Python version: 2.7.14
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 7.2.0
Locale: German/Germany (de_DE)
-
- Veteran
- Posts: 3132
- Joined: Sat May 20, 2017 12:06 pm
- Location: Germany
Re: Installation problems
deleted line 65 in initGui.py:
cfd-of-wb starts.
meshing with cfmesh/shm works.
gmsh does not (which wonder...)
solver runs.
cfd-of-wb starts.
meshing with cfmesh/shm works.
gmsh does not (which wonder...)
solver runs.
- oliveroxtoby
- Posts: 814
- Joined: Fri Dec 23, 2016 9:43 am
- Location: South Africa
Re: Installation problems
Ah, sorry. That was an old import that should not be there. Not sure how that slipped through.thschrader wrote: ↑Sun Jul 22, 2018 10:14 am deleted line 65 in initGui.py:
cfd-of-wb starts.
meshing with cfmesh/shm works.
gmsh does not (which wonder...)
solver runs.
We've done quite a big refactoring of the meshing, allowing 2D meshes to be created now, but there are probably a few glitches. Unfortunately we have had to break backward file compatibility, so the mesh objects in saved files will have to be recreated. Don't think that's the problem here though.
Can you paste more text from the report view showing how the gmsh error begins? One can't conclude much from what is shown.
Thanks for the report.
Oliver
Please provide all the information requested in this post before reporting problems with CfdOF.
-
- Veteran
- Posts: 3132
- Joined: Sat May 20, 2017 12:06 pm
- Location: Germany
Re: Installation problems
Voila.oliveroxtoby wrote: ↑Sun Jul 22, 2018 4:42 pm Can you paste more text from the report view showing how the gmsh error begins? One can't conclude much from what is shown.
- oliveroxtoby
- Posts: 814
- Joined: Fri Dec 23, 2016 9:43 am
- Location: South Africa
Re: Installation problems
Thanks. Should be sorted now.thschrader wrote: ↑Sun Jul 22, 2018 5:08 pmVoila.oliveroxtoby wrote: ↑Sun Jul 22, 2018 4:42 pm Can you paste more text from the report view showing how the gmsh error begins? One can't conclude much from what is shown.
gmsh_report.txt
cfdtest.FCStd
Please provide all the information requested in this post before reporting problems with CfdOF.