Is it possible to create an angular dimension like this (ignore the circled one):
If not, do you think I should create a ticket for it?
Related help topic:
https://forum.freecadweb.org/viewtopic. ... 89#p258156
Angular Dimension From 3 Vertices
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
- wandererfan
- Veteran
- Posts: 6309
- Joined: Tue Nov 06, 2012 5:42 pm
- Contact:
Re: Angular Dimension From 3 Vertices
No - 2 straight edges only. I'll have to check if Dimensions can handle 3 references. Everything so far is only 1 or 2.
Yes, please. It will get lost in the pile otherwise.
Re: Angular Dimension From 3 Vertices
Thanks, submitted as issue #3613
- wandererfan
- Veteran
- Posts: 6309
- Joined: Tue Nov 06, 2012 5:42 pm
- Contact:
Re: Angular Dimension From 3 Vertices
Re: Angular Dimension From 3 Vertices
Thanks wf!wandererfan wrote: ↑Wed Oct 03, 2018 1:37 pm 3 point Angles implemented by git commit b569120131. TechDraw_Dimension_Angle3Pt
Re: Angular Dimension From 3 Vertices
From time to time we saw here people asking for Drawing+DrawingDimensioning WB. That's definitely over now.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
- wandererfan
- Veteran
- Posts: 6309
- Joined: Tue Nov 06, 2012 5:42 pm
- Contact:
Re: Angular Dimension From 3 Vertices
I've been hearing that DD is better for a long time, but I've never seen a detailed comparison. If there is anybody out there with experience in both TD & DD, a "better/worse, missing, etc) feature comparison would be a big help to me.
Re: Angular Dimension From 3 Vertices
Hi
This is only my opinion.
I think placement of views is easier with Drawing
With DD, I can place the lines of axes and change their appearance, and a line arrow for the text
on the other hand, I do not know how to modify the appearance of the hidden lines in the 2 cases
With DD we can add the tolerances = / - on the dimensions
In the 2 systems we can not change the numerical value of the dimensions, nor the symbols like the signs of diameter, Rays nor degree of angle
there is also no option to delete the decimal zero
This is not an exhaustive list
in attachment: the same drawing presented with the 2 systems
This is only my opinion.
I think placement of views is easier with Drawing
With DD, I can place the lines of axes and change their appearance, and a line arrow for the text
on the other hand, I do not know how to modify the appearance of the hidden lines in the 2 cases
With DD we can add the tolerances = / - on the dimensions
In the 2 systems we can not change the numerical value of the dimensions, nor the symbols like the signs of diameter, Rays nor degree of angle
there is also no option to delete the decimal zero
This is not an exhaustive list
in attachment: the same drawing presented with the 2 systems
- Attachments
-
- moyeu1.FCStd
- (184.69 KiB) Downloaded 59 times