Discussions about the development of the TechDraw workbench
wandererfan
Veteran
Posts: 6317 Joined: Tue Nov 06, 2012 5:42 pm
Contact:
Post
by wandererfan » Sat Sep 29, 2018 3:38 pm
Jee-Bee wrote: ↑ Sat Jul 28, 2018 2:06 pm
I want to add something for problem 2.
Add the posibility to flip the arrow's from insine to outside.
a) why would you want to do this?
b) this would only apply to linear dimensions? You wouldn't want to flip the arrows on a Diameter would you?
wandererfan
Veteran
Posts: 6317 Joined: Tue Nov 06, 2012 5:42 pm
Contact:
Post
by wandererfan » Sat Sep 29, 2018 5:46 pm
Jee-Bee wrote: ↑ Sat Jul 28, 2018 2:06 pm
Add the posibility to flip the arrow's from insine to outside.
is this what you mean?
flippedArrowheads.png (35.63 KiB) Viewed 932 times
Jee-Bee
Veteran
Posts: 2566 Joined: Tue Jun 16, 2015 10:32 am
Location: Netherlands
Post
by Jee-Bee » Sat Sep 29, 2018 6:48 pm
Yes i only expect a line between the arrows on the right nide of the cube.
My last complain is just the point on the I. If no time its a great improvement!!
wandererfan
Veteran
Posts: 6317 Joined: Tue Nov 06, 2012 5:42 pm
Contact:
Post
by wandererfan » Wed Oct 03, 2018 1:30 pm
Jee-Bee wrote: ↑ Sat Jul 28, 2018 2:06 pm
Add the posibility to flip the arrow's from insine to outside.
Should be fixed by
git commit 1578b05a98 .
reverseArrow.png (14.36 KiB) Viewed 900 times
wandererfan
Veteran
Posts: 6317 Joined: Tue Nov 06, 2012 5:42 pm
Contact:
Post
by wandererfan » Wed Oct 03, 2018 1:34 pm
chrisb wrote: ↑ Thu Aug 02, 2018 5:47 pm
It would be great if the configurable diameter symbol (default = ⌀) would be part of the format, and not of the value. If the format would be something like
then it could be easily changed to
staying parametric if the diameter changes.
⌀ and R prefixes are now applied to the FormatSpec.
git commit f5668c77ae
phiTolerance.png (18.72 KiB) Viewed 899 times
chrisb
Veteran
Posts: 54201 Joined: Tue Mar 17, 2015 9:14 am
Post
by chrisb » Wed Oct 03, 2018 2:13 pm
Thanks, great improvement.
Jee-Bee
Veteran
Posts: 2566 Joined: Tue Jun 16, 2015 10:32 am
Location: Netherlands
Post
by Jee-Bee » Wed Oct 03, 2018 7:47 pm
You are busy lately thanks for all your work!!