FreeCAD on the web
Forum rules
Be nice to others! Read the FreeCAD code of conduct!
Be nice to others! Read the FreeCAD code of conduct!
- Joel_graff
- Veteran
- Posts: 1949
- Joined: Fri Apr 28, 2017 4:23 pm
- Contact:
Re: FreeCAD on the web
System76 is using FreeCAD to design their new open source hardware!
https://www.phoronix.com/scan.php?page= ... hter-Board
https://www.phoronix.com/scan.php?page= ... hter-Board
FreeCAD Trails workbench for transportation engineering: https://www.github.com/joelgraff/freecad.trails
pivy_trackers 2D coin3D library: https://www.github.com/joelgraff/pivy_trackers
pivy_trackers 2D coin3D library: https://www.github.com/joelgraff/pivy_trackers
Re: FreeCAD on the web
That's a big one! Maybe we should approach them and ask to fill bug reports or post suggestions, improvement ideas or patches if they do some code changes as well? I believe that cooperation with companies using FreeCAD to make money is very important.Joel_graff wrote: ↑Wed Oct 17, 2018 5:15 pm System76 is using FreeCAD to design their new open source hardware!
https://www.phoronix.com/scan.php?page= ... hter-Board
Re: FreeCAD on the web
Realy? I see a screenshot that was shared in twitter by Harris Kenny. But it is not clear that the company's design department is using FreeCAD in their workflow.Joel_graff wrote: ↑Wed Oct 17, 2018 5:15 pm System76 is using FreeCAD to design their new open source hardware!
https://www.phoronix.com/scan.php?page= ... hter-Board
::bitacovir::
==================
One must be absolutely modern.
Arthur Rimbaud (A Season in Hell -1873)
Canal Youtube Grupo Telegram de FreeCAD Español
My personal web site
My GitHub repository
Mini Airflow Tunnel Project
==================
One must be absolutely modern.
Arthur Rimbaud (A Season in Hell -1873)
Canal Youtube Grupo Telegram de FreeCAD Español
My personal web site
My GitHub repository
Mini Airflow Tunnel Project
- Joel_graff
- Veteran
- Posts: 1949
- Joined: Fri Apr 28, 2017 4:23 pm
- Contact:
Re: FreeCAD on the web
Right - there's no way to know without someone explicitly stating where FC fits into their workflow, but it's obvious it is a part of it. FC's learning curve is steep enough that I doubt they'd have done that much design in it on a whim.
FreeCAD Trails workbench for transportation engineering: https://www.github.com/joelgraff/freecad.trails
pivy_trackers 2D coin3D library: https://www.github.com/joelgraff/pivy_trackers
pivy_trackers 2D coin3D library: https://www.github.com/joelgraff/pivy_trackers
- DeepSOIC
- Veteran
- Posts: 7896
- Joined: Fri Aug 29, 2014 12:45 am
- Location: used to be Saint-Petersburg, Russia
Re: FreeCAD on the web
EEVBlog:
https://www.youtube.com/watch?v=MlD4x0WMbZo
The video is not about FreeCAD, and doesn't even mention it. What I would like to point out is the comments about FreeCAD. In v0.16 era, it was almost always like "freecad is hopeless", "freecad is piece o word censored", "freecad sucks". Now most replies range from "freecad is getting somewhere" to "freecad was massively improved" to "freecad is awesome". Looks like some good progress to me
https://www.youtube.com/watch?v=MlD4x0WMbZo
The video is not about FreeCAD, and doesn't even mention it. What I would like to point out is the comments about FreeCAD. In v0.16 era, it was almost always like "freecad is hopeless", "freecad is piece o word censored", "freecad sucks". Now most replies range from "freecad is getting somewhere" to "freecad was massively improved" to "freecad is awesome". Looks like some good progress to me
Re: FreeCAD on the web
I agree, that's something new More opinions here [1].
Average Ratings 50 Reviews
4.5 / 5 Overall
4.5 / 5 Ease of Use
4 / 5 Customer Service
I think we need to work harder on the forum Customer service 4/5 ??
[1] https://www.capterra.com/p/167527/FreeCAD/
Average Ratings 50 Reviews
4.5 / 5 Overall
4.5 / 5 Ease of Use
4 / 5 Customer Service
I think we need to work harder on the forum Customer service 4/5 ??
[1] https://www.capterra.com/p/167527/FreeCAD/
Re: FreeCAD on the web
With more and more examples of projects using FreeCAD the bad comments loss their sense.PrzemoF wrote: ↑Fri Oct 19, 2018 8:59 am I agree, that's something new More opinions here [1].
Average Ratings 50 Reviews
4.5 / 5 Overall
4.5 / 5 Ease of Use
4 / 5 Customer Service
I think we need to work harder on the forum Customer service 4/5 ??
[1] https://www.capterra.com/p/167527/FreeCAD/
::bitacovir::
==================
One must be absolutely modern.
Arthur Rimbaud (A Season in Hell -1873)
Canal Youtube Grupo Telegram de FreeCAD Español
My personal web site
My GitHub repository
Mini Airflow Tunnel Project
==================
One must be absolutely modern.
Arthur Rimbaud (A Season in Hell -1873)
Canal Youtube Grupo Telegram de FreeCAD Español
My personal web site
My GitHub repository
Mini Airflow Tunnel Project
Re: FreeCAD on the web
I asked to Harry Kenny if they are using FreeCAD. He said the Thelio board was designed with KiCAD.Joel_graff wrote: ↑Wed Oct 17, 2018 6:15 pmRight - there's no way to know without someone explicitly stating where FC fits into their workflow, but it's obvious it is a part of it. FC's learning curve is steep enough that I doubt they'd have done that much design in it on a whim.
https://twitter.com/harriskenny/status/ ... 5137774592
::bitacovir::
==================
One must be absolutely modern.
Arthur Rimbaud (A Season in Hell -1873)
Canal Youtube Grupo Telegram de FreeCAD Español
My personal web site
My GitHub repository
Mini Airflow Tunnel Project
==================
One must be absolutely modern.
Arthur Rimbaud (A Season in Hell -1873)
Canal Youtube Grupo Telegram de FreeCAD Español
My personal web site
My GitHub repository
Mini Airflow Tunnel Project
Re: FreeCAD on the web
I knew that the KiCAD FreeCAD binding would have gotten nice resultsbitacovir wrote: ↑Sun Oct 21, 2018 2:14 pm I asked to Harry Kenny if they are using FreeCAD. He said the Thelio board was designed with KiCAD.
https://twitter.com/harriskenny/status/ ... 5137774592
https://forum.freecadweb.org/viewtopic.php?f=9&t=28360