Different beam sections

About the development of the FEM module/workbench.

Moderator: bernd

Post Reply
m.cavallerin
Posts: 115
Joined: Wed May 30, 2018 6:59 pm

Different beam sections

Post by m.cavallerin »

Hi all,

how can I define different beam sections for different lines?
I'm only able to define 1 type and if I try to define two, selecting one at a time, I get the error message when I run the analysis

Enclosed, the test case I'm running

Thanks in advance.

Regards
Attachments
error.png
error.png (16.91 KiB) Viewed 573 times
exampleTwoBeams.fcstd
(11.48 KiB) Downloaded 15 times
User avatar
bernd
Veteran
Posts: 12849
Joined: Sun Sep 08, 2013 8:07 pm
Location: Zürich, Switzerland
Contact:

Re: Different beam sections

Post by bernd »

works great here if you add a reference to both objects ...


exampleTwoBeams-bernd1.fcstd
(43.99 KiB) Downloaded 20 times
m.cavallerin
Posts: 115
Joined: Wed May 30, 2018 6:59 pm

Re: Different beam sections

Post by m.cavallerin »

Personal reminder --> "check one more time before posting spam" :oops:
Thanks a lot.

Regards
chrisb
Veteran
Posts: 53919
Joined: Tue Mar 17, 2015 9:14 am

Re: Different beam sections

Post by chrisb »

m.cavallerin wrote: Tue Oct 23, 2018 8:41 pm Personal reminder --> "check one more time before posting spam" :oops:
Is this a general remark or do refer to something special?
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
m.cavallerin
Posts: 115
Joined: Wed May 30, 2018 6:59 pm

Re: Different beam sections

Post by m.cavallerin »

It refers only to me and the rush to immediately find the solution to a problem.
I asked for help and I got it, thanks to Bernd for support.

In fact it was only a question of checking the analysis settings once more.
I did not mean to offend anyone.
chrisb
Veteran
Posts: 53919
Joined: Tue Mar 17, 2015 9:14 am

Re: Different beam sections

Post by chrisb »

m.cavallerin wrote: Tue Oct 23, 2018 8:58 pm I did not mean to offend anyone.
I did not feel offended, but I was chasing spammers for the last couple of days, so I got alerted.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
User avatar
bernd
Veteran
Posts: 12849
Joined: Sun Sep 08, 2013 8:07 pm
Location: Zürich, Switzerland
Contact:

Re: Different beam sections

Post by bernd »

BTW, if you set 3D output to true you gone see the different size of the sections. You do not even run an analysis for this. You could use the check analysis type for this. But you need an up to date FreeCAD and you need to add a new solver.

bernd
Post Reply