3D modeling videos in FreeCAD 0.17

A place to share learning material: written tutorials, videos, etc.
AllVisuals4U
Posts: 7
Joined: Sat Jul 22, 2017 2:18 pm
Contact:

3D modeling videos in FreeCAD 0.17

Postby AllVisuals4U » Sat Jun 23, 2018 9:12 pm

Hello FreeCAD users!

Last week I started with livestreaming FreeCAD 0.17 videos.
The videos about the Part Design Workbench and Sketcher Workbench are online:

https://youtu.be/MW75e-AXKyE
https://youtu.be/JNEyN66eFsQ

I just model around while i'm livestreaming on YouTube and maybe you can learn something from it.
There's no speech, only some music if i added it.

After thinking about it, i think i won't livestream anymore, but record 3D modeling videos which show how to draw a specific product.
Last edited by AllVisuals4U on Sun Jul 01, 2018 9:43 am, edited 2 times in total.
3D PRINTING & DESIGN TUTORIALS
https://youtube.com/c/AllVisuals4U
chrisb
Posts: 16916
Joined: Tue Mar 17, 2015 9:14 am

Re: FreeCAD 0.17 LIVESTREAMS

Postby chrisb » Sat Jun 23, 2018 9:45 pm

I have to confess that I stopped watching the first video after less than 3 minutes because I had to watch for almost one minute your mostly unsuccessful attempts to apply a symmetry constraint - which on top of shouldn't be applied in that way, because you create an overconstraint sketch in the version you use. This will most probably lead to unpredictable problems in further steps. You should apply symmetry to the corners instead.
AllVisuals4U
Posts: 7
Joined: Sat Jul 22, 2017 2:18 pm
Contact:

Re: FreeCAD 0.17 LIVESTREAMS

Postby AllVisuals4U » Sun Jun 24, 2018 7:56 am

The origin planes obstructed the selection, it took much longer than i thought it was ;-) Thanks for the feedback!
This was my first livestream, i'll avoid failed actions in the future. 8-)
3D PRINTING & DESIGN TUTORIALS
https://youtube.com/c/AllVisuals4U
GeneFC
Posts: 1025
Joined: Sat Mar 19, 2016 3:36 pm
Location: Punta Gorda, FL

Re: FreeCAD 0.17 LIVESTREAMS

Postby GeneFC » Sun Jun 24, 2018 7:13 pm

I don't livestream anything, but I realize some people do.

However, when it comes to something technical, such as FreeCAD, it seems much better to have rehearsed and/or edited tutorials.

Gene
AllVisuals4U
Posts: 7
Joined: Sat Jul 22, 2017 2:18 pm
Contact:

Re: 3D modeling videos in FreeCAD 0.17

Postby AllVisuals4U » Sat Nov 03, 2018 2:46 pm

I made a bunch of step by step 3D modeling tutorials:

Latest video:
https://youtu.be/BL-zpOtTwGE

Playlist:
https://www.youtube.com/playlist?list=P ... p5-kgnTifN
3D PRINTING & DESIGN TUTORIALS
https://youtube.com/c/AllVisuals4U
User avatar
Celica_Supra
Posts: 35
Joined: Sat Nov 03, 2018 11:18 pm
Contact:

Re: 3D modeling videos in FreeCAD 0.17

Postby Celica_Supra » Tue Dec 18, 2018 5:35 am

AllVisuals4U wrote:
Sat Nov 03, 2018 2:46 pm
I made a bunch of step by step 3D modeling tutorials:

Latest video:
https://youtu.be/BL-zpOtTwGE

Playlist:
https://www.youtube.com/playlist?list=P ... p5-kgnTifN
I really like your channel. Subscribed
dima8101
Posts: 13
Joined: Thu May 04, 2017 10:03 am

Re: 3D modeling videos in FreeCAD 0.17

Postby dima8101 » Wed Jan 02, 2019 6:31 pm

Axes in freecad for beginner )
Image
User avatar
hammax
Posts: 808
Joined: Thu Jan 19, 2017 5:03 pm
Location: Ammersee

Re: 3D modeling videos in FreeCAD 0.17

Postby hammax » Sat Jan 05, 2019 10:08 am

...hello dima
Here some derivation of your axis-picture as a mnemonic for numpad and Euler angles.
Attachments
RollPitchY_2.FCStd
FC.18.15536
(122.7 KiB) Downloaded 26 times
Axes_2.png
Axes_2.png (134.34 KiB) Viewed 1122 times