Lanz Bulldog mini tractor
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
Lanz Bulldog mini tractor
Uses flame eater type Stirling engine.
- Attachments
-
- Fin 0.JPG (301.96 KiB) Viewed 4162 times
-
- Fin 1.JPG (117.48 KiB) Viewed 4162 times
-
- Lanz Engine and Gearbox.JPG (55.42 KiB) Viewed 4162 times
-
- Lanz Rear Axle Assembly.JPG (62.35 KiB) Viewed 4162 times
Re: Lanz Bulldog mini tractor
Very impressive, thanks for sharing. Call yourself lucky that these engines had only one cylinder - at most!
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Lanz Bulldog mini tractor
I also have an 8 cylinder micro Aero engine and a lorry with a 2 cylinder under-slung engine amongst many others which I will eventually post.
Re: Lanz Bulldog mini tractor
Hello, I am building the mini tractor lanz, and I would be very useful freecad project. I would really appreciate it if you send it to my mail via pm.
Last edited by Kunda1 on Tue Jun 04, 2019 4:49 pm, edited 1 time in total.
Reason: removed email from post
Reason: removed email from post
Re: Lanz Bulldog mini tractor
FAO axel_sch,
Hi, plans for the Lanz mini tractor can be found here.
http://www.vapeuretmodelesavapeur.com/telechargements4/
Good luck with the project.
Hi, plans for the Lanz mini tractor can be found here.
http://www.vapeuretmodelesavapeur.com/telechargements4/
Good luck with the project.
Re: Lanz Bulldog mini tractor
Hi, If you cannot locate the plans on previous posted link try this one
http://www.vapeuretmodelesavapeur.com/telechargements5/
http://www.vapeuretmodelesavapeur.com/telechargements5/