easyw-fc wrote: ↑Tue Jan 08, 2019 9:34 am
Szymix13 wrote: ↑Tue Jan 08, 2019 9:26 am
My path for KISYS3DMOD is: /usr/share/kicad/modules/packages3d
I have no path in ALT3DMOD
Freecad ver. 0.17 (Rev nr 5235 Git shallow)
KiCad ver. 5.0.2+dfsg1-1
1) do you have your 3D models used in your board in /usr/share/kicad/modules/packages3d ?
2) if you enable Report View Panel in FC which messages do you get?
Still if you could share your kicad_pcb file would be easier to find your issue...
Yes, the paths are the same in Kicad and Freecad for KISYS3DMOD.
We tried it on few computer, and we find out, that when FreeCAD is instaled from Debian repo, its working almost perfecty.
My FreeCAD is downloaded from Flatpak, because Debian verions was crashing, when trying to open/create anything.
Maybe there is some problem with code.
1. He is not loading file, that is in correct path:
FC error: "error missing /usr/share/kicad/modules/packages3d/Connector_PinSocket_2.54mm.3dshapes/PinSocket_2x20_P2.54mm_Vertical.step"
I can find this file in terminal.
2. Same goes with error when starting FC:
/home/**********/.var/app/org.freecadweb.FreeCAD/config/FreeCAD/user.conf.kicad_pcb
/home/**********/.var/app/org.freecadweb.FreeCAD/config/FreeCAD/user.kicad_mod
Both files can be found when using terminal.
We will try tomorrow setting it up, or trying to run Debian version.
Also, maybe i should try running macro instead of addon WB?
Do you have any idea, what is causing this problems?
As for the Kicad project, we tried our own but we also used Templates from Kicad such as RaspberryPi and Arduino.