DOF in a sketch

Have some feature requests, feedback, cool stuff to share, or want to know where FreeCAD is going? This is the place.
Forum rules
Be nice to others! Read the FreeCAD code of conduct!
User avatar
jpg87
Posts: 278
Joined: Thu Mar 16, 2017 7:16 am
Location: Limoges - France
Contact:

DOF in a sketch

Postby jpg87 » Tue Feb 05, 2019 8:27 am

abdullah wrote:...
Hi,
In April 2017, I tried a suggestion :
https://forum.freecadweb.org/viewtopic.php?f=3&t=21691
No doubt she was clumsily expressed.
However, I just noted with pleasure that during the construction of a sketch, it is now possible, by clicking on the number of remaining degrees of freedom, to color the entities not yet constrained.
So I come back to my initial idea: Would not it be more appropriate to color constrained entities as the sketch progresses?
My website : http://help-freecad-jpg87.fr updated 2018/10/17
abdullah
Posts: 3164
Joined: Sun May 04, 2014 3:16 pm

Re: DOF in a sketch

Postby abdullah » Tue Feb 05, 2019 12:44 pm

jpg87 wrote:
Tue Feb 05, 2019 8:27 am
abdullah wrote:...
Hi,
In April 2017, I tried a suggestion :
https://forum.freecadweb.org/viewtopic.php?f=3&t=21691
No doubt she was clumsily expressed.
However, I just noted with pleasure that during the construction of a sketch, it is now possible, by clicking on the number of remaining degrees of freedom, to color the entities not yet constrained.
So I come back to my initial idea: Would not it be more appropriate to color constrained entities as the sketch progresses?
I did understand you idea. No clumsy at all.

I remember that the answer was: It appears to be the same, but it is a different functionality.

I may revisit that topic again somewhere this year. :)
abdullah
Posts: 3164
Joined: Sun May 04, 2014 3:16 pm

Re: DOF in a sketch

Postby abdullah » Tue Feb 05, 2019 12:50 pm

abdullah wrote:
Tue Feb 05, 2019 12:44 pm
jpg87 wrote:
Tue Feb 05, 2019 8:27 am
abdullah wrote:...
Hi,
In April 2017, I tried a suggestion :
https://forum.freecadweb.org/viewtopic.php?f=3&t=21691
No doubt she was clumsily expressed.
However, I just noted with pleasure that during the construction of a sketch, it is now possible, by clicking on the number of remaining degrees of freedom, to color the entities not yet constrained.
So I come back to my initial idea: Would not it be more appropriate to color constrained entities as the sketch progresses?
I did understand you idea. No clumsy at all.

I remember that the answer was: It appears to be the same, but it is a different functionality.

I may revisit that topic again somewhere this year. :)
P.S.: J'ai compris. Mais, si vous voulais parler avec moi et vous exprimer en Français, vous pouvez faire un "ping" dans le subforum Français. Alors, vous aurez le problème que parfois vous ne comprendrez pas ce que je veux dire, mais restez assuré que je comprendrais ce que vous voulez communiquer :)
User avatar
jpg87
Posts: 278
Joined: Thu Mar 16, 2017 7:16 am
Location: Limoges - France
Contact:

Re: DOF in a sketch

Postby jpg87 » Tue Feb 05, 2019 5:16 pm

abdullah wrote:
Tue Feb 05, 2019 12:44 pm
I may revisit that topic again somewhere this year.
abdullah wrote:
Tue Feb 05, 2019 12:50 pm
P.S.: J'ai compris. Mais, si vous voulais parler avec moi et vous exprimer en Français, ...
Thank you for your interest in my proposal.
No problem to converse in English: now I'm used to automatic translators!
Anyway, I really appreciate all the improvements you've made to Sketcher WB.
My website : http://help-freecad-jpg87.fr updated 2018/10/17