Combined counterbore+countersink

Have some feature requests, feedback, cool stuff to share, or want to know where FreeCAD is going? This is the place.
Forum rules
Be nice to others! Read the FreeCAD code of conduct!
openBrain
Veteran
Posts: 9034
Joined: Fri Nov 09, 2018 5:38 pm
Contact:

Re: Combined counterbore+countersink

Post by openBrain »

Hope it can clarify a bit above post :
counterbore_sink.png
counterbore_sink.png (53.97 KiB) Viewed 1201 times
chrisb
Veteran
Posts: 53920
Joined: Tue Mar 17, 2015 9:14 am

Re: Combined counterbore+countersink

Post by chrisb »

That makes things very clear.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
chrisb
Veteran
Posts: 53920
Joined: Tue Mar 17, 2015 9:14 am

Re: Combined counterbore+countersink

Post by chrisb »

Feature request: issue #3893.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
eivindkvedalen
Posts: 602
Joined: Tue Jan 29, 2013 10:35 pm

Re: Combined counterbore+countersink

Post by eivindkvedalen »

chrisb wrote: Fri Mar 08, 2019 10:33 pm Feature request: issue #3893.
Branch for testing: https://github.com/eivindkv/FreeCAD/tree/Fix_issue_3893

Eivind
reox
Posts: 929
Joined: Sat Aug 13, 2016 10:06 am
Contact:

Re: Combined counterbore+countersink

Post by reox »

Nice! +1 from me!

Would be also nice to have more thread options like setting the depth of the thread.
Also a nice feature would be to define the depth of the hole with or without the drill point. As in technical drawing usually the useable hole is measured and not the hole with the depth until the drill tip point.
chrisb
Veteran
Posts: 53920
Joined: Tue Mar 17, 2015 9:14 am

Re: Combined counterbore+countersink

Post by chrisb »

I haven't set up a testing environment, so it would be great if someone else can test this. Would like to see this in master.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
eivindkvedalen
Posts: 602
Joined: Tue Jan 29, 2013 10:35 pm

Re: Combined counterbore+countersink

Post by eivindkvedalen »

reox wrote: Thu Apr 11, 2019 6:43 pm Nice! +1 from me!

Would be also nice to have more thread options like setting the depth of the thread.
Also a nice feature would be to define the depth of the hole with or without the drill point. As in technical drawing usually the useable hole is measured and not the hole with the depth until the drill tip point.
Please register these requests in the tracker, so we don't forget them.

Eivind
Post Reply