no, I did not switch back, I improved the directory handling once again. Seams not yet as good as the former one. Could you be more specific. What does not work for you?
The short answer is https://github.com/berndhahnebach/FreeC ... #L344-L346HarryvL wrote: ↑Wed Apr 10, 2019 4:09 am 2) Concrete friction angle is not set to a default value. If left blank then FC crashes upon post processing
3) There is no unit specified for friction angle, so it is unclear if you need to put it in degrees or radians. If only a value is added (say 30) then again post processing crashes with:4) Same issue as 2) above for yield strength of steelCode: Select all
File "/home/harry/FC_Dev/Build/Mod/Fem/femresult/resulttools.py", line 381, in add_principal_stress_reinforced matrix_af = float(FreeCAD.Units.Quantity(obj.Material['AngleOfFriction']).getValueAs('rad')) ValueError: Unit mismatch
5) If I manually correct the above (add friction angle 0.3 rad and yield strength 500 MPa) then I still get a crash in post processing:
Check user inputs is one of the most import developments for a software and one which does not make much fun I will have a look.