Gerade verzahnt/schräg verzahnt

In diesem Forum Fragen und Diskussionen in Deutsch
Forum rules
Foren-Regeln und hilfreiche Informationen

WICHTIG: Bitte zuerst lesen, bevor Sie posten
Post Reply
Zahnradmaus
Posts: 1
Joined: Fri Apr 26, 2019 9:06 am

Gerade verzahnt/schräg verzahnt

Post by Zahnradmaus »

Hallo Freunde,

kann man schrägverzahnte mit geradverzahnten Zahnrädern paaren, ohne dass es zu Problemen kommt?

Gibt es eine Software, mit der ich das simulieren kann?

In meinem Getriebe sind M0,2 gerade verzahnte Zahnräder (Kopfkreisdurchm. 4mm, 18 Zähne) eingebaut.
Da ich ein Zwischenrad verloren habe suche ich einen Ersatz.
Günstig und kurzfristig kann ich ein schrägverzahntes Zahnrad bekommen.


Gruß und vorab vielen Dank

Zahnradmaus
User avatar
wandererfan
Veteran
Posts: 6268
Joined: Tue Nov 06, 2012 5:42 pm
Contact:

Re: Gerade verzahnt/schräg verzahnt

Post by wandererfan »

Translation by Google:

Hello friends,

Is it possible to mate helical gears with straight sprockets without causing problems?

Is there any software that I can use to simulate this?

In my gear M0,2 straight toothed gears (head circle diameter 4mm, 18 teeth) are installed.
Since I've lost an idler I'm looking for a replacement.
Cheap and short term I can get a helical gear.


Greetings and thanks in advance

gear mouse
chrisb
Veteran
Posts: 53945
Joined: Tue Mar 17, 2015 9:14 am

Re: Gerade verzahnt/schräg verzahnt

Post by chrisb »

Moved to Help forum.

You cannot just replace a straight toothed gear in a gearbox by a helical gear. Both types can be paired of the axes are positioned in the appropriate angle as well, but not if they are supposed to be parallel.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
User avatar
NormandC
Veteran
Posts: 18589
Joined: Sat Feb 06, 2010 9:52 pm
Location: Québec, Canada

Re: Gerade verzahnt/schräg verzahnt

Post by NormandC »

Chris, come on. Again? German. :roll:
chrisb
Veteran
Posts: 53945
Joined: Tue Mar 17, 2015 9:14 am

Re: Gerade verzahnt/schräg verzahnt

Post by chrisb »

This time I had seen it, but as wandererfan gave already a translation I had left it here. And now I'm in some kind of undefined state and don't know what to do :( .
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
openBrain
Veteran
Posts: 9034
Joined: Fri Nov 09, 2018 5:38 pm
Contact:

Re: Gerade verzahnt/schräg verzahnt

Post by openBrain »

IMHO there are 2 questions :
  • Is the OP able to read answers written in english ? If not, what is done here has no sense for him/her. In that case better keep it in the german subforum. ;)
  • Is that acceptable that the thread title is not in english (regarding the body, it's acceptable for me to get a translation) ? If the OP wants to keep its topic here, I think he should at least translate this.
My 2 cents :P
chrisb
Veteran
Posts: 53945
Joined: Tue Mar 17, 2015 9:14 am

Re: Gerade verzahnt/schräg verzahnt

Post by chrisb »

Verschoben ins deutsche Forum.

Kannst Du die englische Antwort oben verstehen?
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
User avatar
r.tec
Posts: 533
Joined: Thu Oct 23, 2014 4:06 pm
Location: Bad Münstereifel, NRW, Germany
Contact:

Re: Gerade verzahnt/schräg verzahnt

Post by r.tec »

Zahnradmaus wrote: Fri Apr 26, 2019 10:23 am Gibt es eine Software, mit der ich das simulieren kann?

https://www.kisssoft.ch/deutsch/home/index.php <- da gibts irgendwo eine Demo-Version
chrisb
Veteran
Posts: 53945
Joined: Tue Mar 17, 2015 9:14 am

Re: Gerade verzahnt/schräg verzahnt

Post by chrisb »

Wenn Du nur ein geradverzanhtes Zahnrad gegen ein schrägverzahntes austauschen wills, dann wird das nicht gehen, bestenfalls machst Du die Zahnräder kaputt, schlimmstenfalls auch noch Wellen und Gehäuse. Stell' Dir ein geradeverzahntes Rad vor und Du schaust direkt auf die Zähne. Wenn Du nun ein schrägverzahntes drauflegst, dann kreuzen sich die Zähne und greifen nicht ineinander.

Wenn Du beide Zahnräder austauschst, dann geht das im Prinzip, allerdings erzeugst Du dann Axialkräfte auf der Welle. Um die aufzufangen kannst Du ein doppeltschrägverzahntes Rad nehmen (der Citroen-Doppelwinkel hat da seinen Ursprung) oder Du musst die Wellen mit Schräg- oder zusätzlichen Axiallagern ausstatten.
Die dritte der beiden Möglichkeiten ist, dass Du dich einfach nicht um die Axialkräfte scherst.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
freecad-heini-1
Veteran
Posts: 7788
Joined: Tue Jan 07, 2014 11:10 am
Contact:

Re: Gerade verzahnt/schräg verzahnt

Post by freecad-heini-1 »

Zahnradmaus wrote: Fri Apr 26, 2019 10:23 am Hallo Freunde,

kann man schrägverzahnte mit geradverzahnten Zahnrädern paaren, ohne dass es zu Problemen kommt?

Gibt es eine Software, mit der ich das simulieren kann?

In meinem Getriebe sind M0,2 gerade verzahnte Zahnräder (Kopfkreisdurchm. 4mm, 18 Zähne) eingebaut.
Da ich ein Zwischenrad verloren habe suche ich einen Ersatz.
Günstig und kurzfristig kann ich ein schrägverzahntes Zahnrad bekommen.


Gruß und vorab vielen Dank

Zahnradmaus
Bitte beschreibe das Zwischenrad sehr genau.
Post Reply