OS: Linux (LXDE/LXDE)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.16854 (Git)
Build type: Release
Branch: master
Hash: fe0fd5512ba9a8a9c729cdc47af35bbe965050ac
Python version: 2.7.15
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: English
I'm getting OpenCamLib is not working! when I open my FreeCAD file. I realised it was not installed, so I followed the instructions for git down/build/install. That seems fine but restarting FreeCAD gives the same message.
Presumably I need to rebuild FreeCAD now OpenCamLib is installed.
I go back to my freecad-build directory and re-run the cmake command line.
Code: Select all
cmake -DCMAKE_BUILD_TYPE=Release -DFREECAD_USE_OCC_VARIANT="Official Version" ../FreeCAD
I do not see anything about OpenCam either being detected or missing. What should I be looking for in the output?
Code: Select all
==============
Summary report
==============
-- Python: [/bin/python2.7] [-python2.7]
-- PCL: not enabled
-- pybind11: not enabled
-- Boost: 106600
-- XercesC: [/usr/lib64/libxerces-c.so] [/usr/include]
-- ZLIB: 1.2.11
-- PyCXX: [/svn/FreeCAD/src]
-- OCC: 7.3.0 [TKFillet;TKMesh;TKernel;TKG2d;TKG3d;TKMath;TKIGES;TKSTL;TKShHealing;TKXSBase;TKBin;TKBool;TKBO;TKCDF;TKBRep;TKTopAlgo;TKGeomAlgo;TKGeomBase;TKOffset;TKPrim;TKSTEP;TKSTEPBase;TKSTEPAttr;TKHLR;TKFeat]
-- SMESH: build internal
-- MEDFile: [/usr/lib64/libmedC.so;/usr/lib64/libmed.so] [/usr/include/med]
-- HDF5: 1.8.20
-- VTK: 7.1.1
-- NETGEN: not enabled
-- SWIG: 3.0.12
-- Eigen3 3.3.7
-- Qt4:
-- QtWebKit: found
-- Shiboken: 1.2.4 [/usr/include/shiboken]
-- PySide: 1.2.4 [/usr/include/PySide]
-- PySideTools: [/bin/pyside-uic] [/bin/pyside-rcc]
-- Freetype: 2.9.1
-- OpenGLU: /usr/lib64/libGLU.so [/usr/lib64/libGLU.so][/usr/include]
-- Coin3D: [/usr/local/lib64/libCoin.so] [/usr/local/include]
-- SPNAV: [/usr/lib64/libspnav.so] [/usr/include]
-- Matplotlib: 2.2.4
-- Rift: not enabled (BUILD_VR)
-- Doxygen: not found
=================================================
Now run 'cmake --build /svn/freecad-build' to build FreeCAD
=================================================
Code: Select all
dnf remove python2-pybind11 python3-pybind11 pybind11-devel
Dependencies resolved.
=========================================================================================================
Package Architecture Version Repository Size
=========================================================================================================
Removing:
pybind11-devel x86_64 2.2.4-1.fc29 @fedora 542 k
python2-pybind11 x86_64 2.2.4-1.fc29 @fedora 6.7 k
python3-pybind11 x86_64 2.2.4-1.fc29 @fedora 6.2 k
Transaction Summary
=========================================================================================================
Remove 3 Packages
Freed space: 554 k
Is this ok [y/N]: n
Operation aborted.
Code: Select all
-- PCL: not enabled
Thanks for any explanations, especially on OpenCamLib.
[EDIT] see end of thread for a work around for python 2.7