EDIT: see https://forum.freecadweb.org/viewtopic. ... 30#p319635bernd wrote: ↑Sat Jul 06, 2019 10:50 am - start FreeCAD
- load FEM 3D example
- change to analysis type frequency
- change from first 15 to first 8 frequencies
- delete constraint fixed and constraint force
- run analyisis
- the imaginary part in Hz is missing
- screen and file attached
test.FCStd
Box_Mesh.dat.txt
Screenshot_20190706_125522.png
extraction of negative eigenvalues
Moderator: bernd
Forum rules
and Helpful information for the FEM forum
and Helpful information for the FEM forum
Re: extraction of negative eigenvalues
Last edited by HarryvL on Tue Jul 09, 2019 12:25 am, edited 2 times in total.
Re: extraction of negative eigenvalues
EDIT: see https://forum.freecadweb.org/viewtopic. ... 30#p319635
Last edited by HarryvL on Tue Jul 09, 2019 12:26 am, edited 2 times in total.
Re: extraction of negative eigenvalues
Last edited by HarryvL on Tue Jul 09, 2019 12:26 am, edited 2 times in total.
Re: extraction of negative eigenvalues
EDIT: see https://forum.freecadweb.org/viewtopic. ... 30#p319635
Last edited by HarryvL on Tue Jul 09, 2019 12:27 am, edited 1 time in total.
Re: extraction of negative eigenvalues
Why not using numpy arrays against math with a loop as you use now?
Re: extraction of negative eigenvalues
I am unsure, but we may do something totally wrong or missunderstand ...
Attached a screen. The green value is presentet to the user as Eigenmode Frequency for mode no 8. This is what FreeCAD does ATM. As far as I read the table ther is no imaginary part in cycles / time. Attached the screen again.
What makes me unsure is the Eigenvalue. AFAIK the eigenvalue is the natural frequency, but we have two columns one for Eigenvalue and one for the frequency ...
Mhh, I should do more earthqake analyses ... I would better know than ...
Attached a screen. The green value is presentet to the user as Eigenmode Frequency for mode no 8. This is what FreeCAD does ATM. As far as I read the table ther is no imaginary part in cycles / time. Attached the screen again.
What makes me unsure is the Eigenvalue. AFAIK the eigenvalue is the natural frequency, but we have two columns one for Eigenvalue and one for the frequency ...
Mhh, I should do more earthqake analyses ... I would better know than ...
- Attachments
-
- screen.png (57.15 KiB) Viewed 1243 times
Re: extraction of negative eigenvalues
This is surprising and different from what I remember. I will look into it and compare to what I did for the bridge.
EDIT: the natural frequency in rad/s is the square root of the eigenvalue of the free vibration problem.
EDIT: see https://forum.freecadweb.org/viewtopic. ... 30#p319635
EDIT: the natural frequency in rad/s is the square root of the eigenvalue of the free vibration problem.
EDIT: see https://forum.freecadweb.org/viewtopic. ... 30#p319635
Last edited by HarryvL on Tue Jul 09, 2019 12:30 am, edited 1 time in total.
Re: extraction of negative eigenvalues
great
than what is the column eigenvalue for? Do you know some paper which explains all this without tons of integrals and matrix operations ... wikipedia does not a good job here IMHO.