Bug : FreeCAD 0.18 : adjusting transparency on primitive shape causes error
Forum rules
Be nice to others! Read the FreeCAD code of conduct!
Be nice to others! Read the FreeCAD code of conduct!
Re: Bug : FreeCAD 0.18 : adjusting transparency on primitive shape causes error
Hi @Syres and @Kisolre.
thanks again for your attention.
I have tested 3 alternative builds and all are OK - none of them exhibit my reported bug when applying transparency to a primitive cube.
FYI, the versions I tested successfully without the fault were :
* FreeCAD_0.18.16110_LP_11.11_PY2QT4-WinVS2013_x64_portable
* FreeCAD_0.19.17352_x64_LP_11.11_PY2QT4-WinVS2013
* FreeCAD_0.19.17433_x64_LP_12.1.2_PY3QT5-WinVS2015
(NOTE the latter is a PY3QT5 build)
The version that had the bug was installed from the following download :
* FreeCAD-0.18.16117.dbb4cc6-WIN-x64-installer.exe
Obviously this version is not so stable after all !
Glad to be of assistance testing this software !
cheers.
thanks again for your attention.
I have tested 3 alternative builds and all are OK - none of them exhibit my reported bug when applying transparency to a primitive cube.
FYI, the versions I tested successfully without the fault were :
* FreeCAD_0.18.16110_LP_11.11_PY2QT4-WinVS2013_x64_portable
* FreeCAD_0.19.17352_x64_LP_11.11_PY2QT4-WinVS2013
* FreeCAD_0.19.17433_x64_LP_12.1.2_PY3QT5-WinVS2015
(NOTE the latter is a PY3QT5 build)
The version that had the bug was installed from the following download :
* FreeCAD-0.18.16117.dbb4cc6-WIN-x64-installer.exe
Obviously this version is not so stable after all !
Glad to be of assistance testing this software !
cheers.
Re: Bug : FreeCAD 0.18 : adjusting transparency on primitive shape causes error
I can't reproduce with
OS: Windows 7
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.18.16117 (Git)
Build type: Release
Branch: releases/FreeCAD-0-18
Hash: dbb4cc6415bac848a294f03b80f65e888d531742
Python version: 3.6.6
Qt version: 5.6.2
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: English/UnitedStates (en_US)
I also have a NVideo card
It is interesting that the 0.19.x LP_12.1.2 builds works, it uses QT 5.12, there is also a 0.19.x Conda build that uses that uses QT 5.6.x (the same as the release) Can you test this as well?
I am preparing the 0.18.3 Win binaries as of this posting, but they use QT 5.6.x, I don't think 0.18 was ported to QT 5.12.
This is a very good data point, Thanks for testing!
OS: Windows 7
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.18.16117 (Git)
Build type: Release
Branch: releases/FreeCAD-0-18
Hash: dbb4cc6415bac848a294f03b80f65e888d531742
Python version: 3.6.6
Qt version: 5.6.2
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: English/UnitedStates (en_US)
I also have a NVideo card
It is interesting that the 0.19.x LP_12.1.2 builds works, it uses QT 5.12, there is also a 0.19.x Conda build that uses that uses QT 5.6.x (the same as the release) Can you test this as well?
I am preparing the 0.18.3 Win binaries as of this posting, but they use QT 5.6.x, I don't think 0.18 was ported to QT 5.12.
This is a very good data point, Thanks for testing!
"fight the good fight"
Re: Bug : FreeCAD 0.18 : adjusting transparency on primitive shape causes error
@sgrogan
no problem.
I only discovered FreeCAD yesterday morning and it seems a very impressive bit of software, but I ran into a problem when trying to follow the beginners' tutorial on YouTube so thought I'd better report it !
If you'd like me to test future builds for this bug, I'd be happy to do so.
My graphics is ATI R7 integrated on AMD "Kaveri" chip.
Obviously this is a few years old now but still going strong & with latest Windows 10 OS
cheers.
no problem.
I only discovered FreeCAD yesterday morning and it seems a very impressive bit of software, but I ran into a problem when trying to follow the beginners' tutorial on YouTube so thought I'd better report it !
If you'd like me to test future builds for this bug, I'd be happy to do so.
My graphics is ATI R7 integrated on AMD "Kaveri" chip.
Obviously this is a few years old now but still going strong & with latest Windows 10 OS
cheers.
Re: Bug : FreeCAD 0.18 : adjusting transparency on primitive shape causes error
Thanks! Your doing it how we prefer it. FreeCAD has a lot of dedicated users/testers to help to triage these bugs, so thanks for doing it here.
Can you test this https://github.com/FreeCAD/FreeCAD/rele ... nVS2015.7z It is a QT5.6 build from the same FreeCAD source that worked for you with a QT5.12 build (This is one of the reasons we provide both)
It would be good if any linux/osx users could test (I think QT 5.9.x)
"fight the good fight"
Re: Bug : FreeCAD 0.18 : adjusting transparency on primitive shape causes error
Hi @sgrogan
I just tried the version you sent me and sadly I have to report it exhibits the bug.
Here is a screenshot after I changed the transparency :
I re-checked the 12.1.12 version and still no problem with that ( I began to doubt myself so thought I should re-check !)
here's a screenshot of that :
My software development days were in the 20th century so I am not overly familiar with Python.
Maybe I should learn some !
but now retired I prefer to play my guitar !
lmao
I just tried the version you sent me and sadly I have to report it exhibits the bug.
Here is a screenshot after I changed the transparency :
I re-checked the 12.1.12 version and still no problem with that ( I began to doubt myself so thought I should re-check !)
here's a screenshot of that :
My software development days were in the 20th century so I am not overly familiar with Python.
Maybe I should learn some !
but now retired I prefer to play my guitar !
lmao
Re: Bug : FreeCAD 0.18 : adjusting transparency on primitive shape causes error
This is great On Win QT 5.6 is bad, QT 5.12 is good.
Can you post the driver version?My graphics is ATI R7 integrated on AMD "Kaveri" chip.
Thanks
"fight the good fight"
Re: Bug : FreeCAD 0.18 : adjusting transparency on primitive shape causes error
From 'Speccy' :
Code: Select all
Graphics
Monitor 1
Name PLE2483H on AMD Radeon R7 Graphics [i].. . . (Iiyama display)[/i]
Current Resolution 1920x1080 pixels
Work Resolution 1920x1027 pixels
State Enabled
Multiple displays Extended, Primary, Enabled
Monitor Width 1920
Monitor Height 1080
Monitor BPP 32 bits per pixel
Monitor Frequency 59 Hz
Device \\.\DISPLAY1\Monitor0
Monitor 2
Name NEC LCD1760NX on AMD Radeon R7 Graphics
Current Resolution 1280x1024 pixels
Work Resolution 1280x994 pixels
State Enabled
Multiple displays Extended, Secondary, Enabled
Monitor Width 1280
Monitor Height 1024
Monitor BPP 32 bits per pixel
Monitor Frequency 60 Hz
Device \\.\DISPLAY2\Monitor0
ATI AMD Radeon(TM) R7 Graphics
Manufacturer ATI
Model AMD Radeon R7 Graphics
Device ID 1002-1313
Subvendor ASUStek Computer Inc (1043)
Current Performance Level Level 0
Current GPU Clock 351 MHz
Current Memory Clock 800 MHz
Current Shader Clock 800 MHz
GPU Clock 720.0 MHz
Temperature 9 °C
[b]Driver version 23.20.15017.3010[/b]
Memory Type DDR3
Memory 1024 MB
Bandwidth 25.6 GB/s
Count of performance levels : 2
Level 1 - "Perf Level 0"
GPU Clock 351 MHz
Shader Clock 800 MHz
Level 2 - "Perf Level 1"
GPU Clock 720 MHz
Shader Clock 800 MHz
Last edited by oldspotty on Fri Jul 19, 2019 5:57 pm, edited 2 times in total.
Re: Bug : FreeCAD 0.18 : adjusting transparency on primitive shape causes error
Code: Select all
CPU
AMD A10-7700K
Cores 4
Threads 4
Name AMD A10-7700K
Code Name Kaveri
Package Socket FM2+ (906)
Technology 28nm
Specification AMD A10-7700K Radeon R7, 10 Compute Cores 4C+6G
Family F
Extended Family 15
Model 0
Extended Model 30
Stepping 1
Revision KV-A1
Instructions MMX (+), SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, SSE4A, AMD 64, NX, VMX, AES, AVX, FMA3, FMA4
Virtualization Supported, Disabled
Hyperthreading Not supported
Fan Speed 686 RPM
Stock Core Speed 4000 MHz
Stock Bus Speed 100 MHz
Average Temperature 70 °C
Caches
L1 Data Cache Size 4 x 16 KBytes
L1 Instructions Cache Size 2 x 96 KBytes
L2 Unified Cache Size 2 x 2048 KBytes
Cores
Core Speed Multiplier Bus Speed Temperature Threads
Core 0 3999.1 MHz x 40.0 100.0 MHz 70 °C APIC ID: 0
Core 1 3999.1 MHz x 40.0 100.0 MHz 70 °C APIC ID: 1
Core 2 3999.1 MHz x 40.0 100.0 MHz 70 °C APIC ID: 2
Core 3 3999.1 MHz x 40.0 100.0 MHz 70 °C APIC ID: 3
RAM
Memory slots
Total memory slots 4
Used memory slots 2
Free memory slots 2
Memory
Type DDR3
Size 16384 MBytes
Channels # Dual
DRAM Frequency 799.8 MHz
CAS# Latency (CL) 9 clocks
RAS# to CAS# Delay (tRCD) 9 clocks
RAS# Precharge (tRP) 10 clocks
Cycle Time (tRAS) 24 clocks
Bank Cycle Time (tRC) 40 clocks
Physical Memory
Memory Usage 48 %
Total Physical 15 GB
Available Physical 7.72 GB
Total Virtual 19 GB
Available Virtual 7.98 GB
SPD
Number Of SPD Modules 2
Slot #1
Slot #2
Motherboard
Manufacturer ASUSTeK COMPUTER INC.
Model A88XM-PLUS (FM2+ )
Version Rev X.0x
Chipset Vendor AMD
Chipset Model K15 IMC
Chipset Revision 00
Southbridge Vendor AMD
Southbridge Model A88X FCH
Southbridge Revision 2.6
System Temperature 33 °C
BIOS
Brand American Megatrends Inc.
Version 1601
Date 23/06/2014
Voltage
+5V 5.040 V
+3.3V 3.360 V
+12V 12.000 V
VIN3 0.176 V
VIN4 0.432 V
VCORE 1.440 V
PCI Data
Slot PCI-E
Slot Type PCI-E
Slot Usage In Use
Bus Width 32 bit
Slot Designation PCIEX16_1
Characteristics 3.3V, Shared, PME
Slot Number 0
Slot PCI-E
Slot Type PCI-E
Slot Usage Available
Bus Width 32 bit
Slot Designation PCIEX1_1
Characteristics 3.3V, Shared, PME
Slot Number 1
Slot PCI
Slot Type PCI
Slot Usage Available
Bus Width 32 bit
Slot Designation PCI1
Characteristics 3.3V, Shared, PME
Slot Number 2
Slot PCI-E
Slot Type PCI-E
Slot Usage In Use
Bus Width 32 bit
Slot Designation PCIEX16_2
Characteristics 3.3V, Shared, PME
Slot Number 3
Operating System
Windows 10 Home 64-bit
Computer type: Desktop
Installation Date: 12/06/2019 02:12:47
Serial Number: ***
Windows Security Center
User Account Control (UAC) Enabled
Notify level 2 - Default
Windows Update
AutoUpdate Download Automatically and Install at Set Scheduled time
Schedule Frequency Every Day
Schedule Time
Windows Defender
Windows Defender Disabled
Firewall
Firewall Enabled
Display Name Bitdefender Firewall
Antivirus
Windows Defender
Antivirus Disabled
Virus Signature Database Up to date
Bitdefender Antivirus
Antivirus Enabled
Virus Signature Database Up to date
.NET Frameworks installed
v4.8 Full
v4.8 Client
v3.5 SP1
v3.0 SP2
v2.0 SP2
Internet Explorer
Version 11.239.18362.0
PowerShell
Version 5.1.18362.1
Java
Java Runtime Environment
Path C:\Program Files (x86)\Java\jre1.8.0_211\bin\java.exe
Version 8.0
Update 211
Build 12
Last edited by oldspotty on Fri Jul 19, 2019 5:58 pm, edited 1 time in total.
Re: Bug : FreeCAD 0.18 : adjusting transparency on primitive shape causes error
Please edit your posts and put the output in code tags </>. It keeps the indentation and increases readability.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Bug : FreeCAD 0.18 : adjusting transparency on primitive shape causes error
Hi @chrisb
there is no code in my post,
only a text capture from the screen of my PC system settings as displayed using the 'Speccy' utility.
I dumped it as @sgrogan requested more info about my PC set-up and I thought he may as well have the lot !
cheers,
there is no code in my post,
only a text capture from the screen of my PC system settings as displayed using the 'Speccy' utility.
I dumped it as @sgrogan requested more info about my PC set-up and I thought he may as well have the lot !
cheers,