FreeCAD on the web

Post by **Kunda1** » Tue Jul 02, 2019 11:07 pm

Scientific Paper: Computerized system based on FreeCAD for geometric simulation of the
oil and gas equipment thread turning
Journal: IOP Conference Series: Materials Science and Engineering
Authors: V B Kopei, O R Onysko and V G Panchuk
Ivano-Frankivsk National Technical University of Oil and Gas, Department of
Computerized Machine-Building Production, Karpatska str., no. 15, 76019 IvanoFrankivsk, Ukraine

Source:
https://iopscience.iop.org/article/10.1 ... 012032/pdf
https://iopscience.iop.org/article/10.1 ... 7/1/012032

Post by **Kunda1** » Tue Jul 02, 2019 11:26 pm

Full Circle Magazine - The Independent Magazine for the Ubuntu Linux Community
has published an 'Intro to FreeCAD' for this issue (Issue #127). It's actually part #8 in a series they have ongoing about FreeCAD. Note: English, French, and Hungarian versions are available.
https://fullcirclemagazine.org/issue-127/

http://dl.fullcirclemagazine.org/issue127_en.pdf

DeepSOIC · Post by **DeepSOIC** » Tue Jul 23, 2019 8:29 am

https://www.youtube.com/watch?v=uY4Zuah66IA
https://www.youtube.com/watch?v=0tt3QHRiaRI
Meanwhile on HexiBase YT channel. A pro audio engineer got himself a 3d printer, and makes enclosures and other stuff. Uses FreeCAD.

shiftee · Post by **shiftee** » Mon Jul 29, 2019 10:55 am

Potential Kickstarter project for an Open Source E-Book reader/tablet.

FreeCAD can be seen in the video.

CAD file for enclosure is planned to be released at end of campaign.

https://www.kickstarter.com/projects/bi ... n=145d1ee3

shiftee · Post by **shiftee** » Fri Aug 16, 2019 9:44 am

A Clinical Grade Libre/Open Source 3D Printed Otoscope

https://medium.com/@trklou/a-clinical-g ... 1a0a6295e6

They are looking for help in remaking their designs in FreeCAD

Post by **PrzemoF** » Fri Aug 16, 2019 10:31 am

shiftee wrote: ↑Fri Aug 16, 2019 9:44 am A Clinical Grade Libre/Open Source 3D Printed Otoscope

https://medium.com/@trklou/a-clinical-g ... 1a0a6295e6

They are looking for help in remaking their designs in FreeCAD

Good find! I don't want to open an account just for the sake of posting a comment there, but they could ask for help on our forum..

shiftee · Post by **shiftee** » Fri Aug 16, 2019 1:13 pm

Looks like it's on their to-do list thanks to luzpaz

https://github.com/GliaX/Otoscope/issues/4

Post by **adrianinsaval** » Fri Aug 23, 2019 5:52 pm

Not sure if posted before but CFD Direct From the Cloud includes Freecad 0.18.3
https://cfd.direct/cloud/cfddfc-v7/

triplus · Post by **triplus** » Fri Aug 30, 2019 10:54 am

Mayo: Mayo is a basic 3D viewer inspired by FreeCAD.

saso · Post by **saso** » Fri Aug 30, 2019 12:47 pm

triplus wrote: ↑Fri Aug 30, 2019 10:54 am Mayo: Mayo is a basic 3D viewer inspired by FreeCAD.

hmm, they seem to have quite nice cut fills...

FreeCAD on the web

Re: FreeCAD on the web

Re: FreeCAD on the web

Re: FreeCAD on the web

Re: FreeCAD on the web

Re: FreeCAD on the web

Re: FreeCAD on the web

Re: FreeCAD on the web

Re: FreeCAD on the web

Re: FreeCAD on the web

Re: FreeCAD on the web