TechDraw Balloons

Info about new community or project announcements, implemented features, classes, modules or APIs. Might get technical!
PLEASE DO NOT POST HELP REQUESTS OR OTHER DISCUSSIONS HERE!
User avatar
Kunda1
Posts: 6209
Joined: Thu Jan 05, 2017 9:03 pm

Re: TechDraw Balloons

Postby Kunda1 » Fri Sep 13, 2019 1:22 am

Did this get mentioned in the 0.19 release notes ?
Want to contribute back to FC? Checkout:
#lowhangingfruit | Use the Source, Luke. | How to Help FreeCAD | How to report FC bugs and features
chrisb
Posts: 20524
Joined: Tue Mar 17, 2015 9:14 am

Re: TechDraw Balloons

Postby chrisb » Fri Sep 13, 2019 2:09 am

liutas4x4 wrote:
Thu Sep 12, 2019 6:21 pm
triplus wrote:
Wed Apr 03, 2019 10:15 pm
P.S. I used to add them in Inkscape. ;)
Mee too. It is the best way for now.
I don't think so at all. The best way for me is to use balloons directly in FreeCAD. Easy to handle, looking great, what else can be expected?
liutas4x4
Posts: 61
Joined: Sat Jul 16, 2016 9:16 am

Re: TechDraw Balloons

Postby liutas4x4 » Fri Sep 13, 2019 8:23 am

I am not speaking about balloons only. It is about all graphics, about total editing of drawings.
Sorry to mention it, but FC drawings are looking too non-pro for now.
Old DrawingDimentioning WB was far better. But even after DD WB there were a lot of corrections in second graphic editor.

Hope it will be better one day )))

Yours,
Eugenijus.
triplus
Posts: 8835
Joined: Mon Dec 12, 2011 4:45 pm

Re: TechDraw Balloons

Postby triplus » Wed Sep 25, 2019 4:20 pm

liutas4x4 wrote:
Thu Sep 12, 2019 6:21 pm
Mee too. It is the best way for now.
The truth is things have substantially improved, over the last couple of years. An average technical drawing should now be doable in FreeCAD, not requiring much post-processing in external software at all. I have just noticed:

https://forum.freecadweb.org/viewtopic.php?f=35&t=39571

All in all, from drawing templates, different types of views, dimensions, hatching, balloons, welding symbols, tolerances, tables, standards compliance ... Huge improvements all over.
freecad-heini-1
Posts: 6221
Joined: Tue Jan 07, 2014 11:10 am
Contact:

Re: TechDraw Balloons

Postby freecad-heini-1 » Sun Dec 29, 2019 3:09 pm

What is the possibility to dock the starting point of a balloon to another edge? After a restart of Freecad the points were lost. How can you reset them quickly and easily so that they stay on the view if it is moved?
User avatar
wandererfan
Posts: 3318
Joined: Tue Nov 06, 2012 5:42 pm

Re: TechDraw Balloons

Postby wandererfan » Sun Dec 29, 2019 3:28 pm

freecad-heini-1 wrote:
Sun Dec 29, 2019 3:09 pm
What is the possibility to dock the starting point of a balloon to another edge? After a restart of Freecad the points were lost. How can you reset them quickly and easily so that they stay on the view if it is moved?
drag moves the bubble. ctrl + drag moves the point. The arrow and bubble should travel with the view when the view is dragged.

Which points were lost? There was a recent change to fix positioning issues - https://github.com/FreeCAD/FreeCAD/pull/2837.
freecad-heini-1
Posts: 6221
Joined: Tue Jan 07, 2014 11:10 am
Contact:

Re: TechDraw Balloons

Postby freecad-heini-1 » Sun Dec 29, 2019 9:32 pm

wandererfan wrote:
Sun Dec 29, 2019 3:28 pm
drag moves the bubble. ctrl + drag moves the point. The arrow and bubble should travel with the view when the view is dragged.
Thank you very much. That works.