Hello everyone
I recently bought an electric car and found that simply cutting a piece of plastic can unlock bonus transfers More information here. Unfortunately, the original part is unreachable and if you can get it at a nonsense price (140EUR). I want to create it and share to thinginverse to help EV comunity. But this shape its so iregural that I dont know where to start.
Can you give me some hints?
Or the sequence to design it?
Design help - irregular shape
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
-
- Posts: 20
- Joined: Sat Apr 21, 2018 9:34 am
-
- Veteran
- Posts: 5513
- Joined: Thu Apr 05, 2018 1:53 am
Re: Design help - irregular shape
Your images don't show up. You can attach them directly by drag and drop as I have done here for you.
The lines are 10mm apart?
Edit: I deleted mine since I see you fixed your post while I was doing it.
-
- Posts: 20
- Joined: Sat Apr 21, 2018 9:34 am
Re: Design help - irregular shape
Lines are 8mm apart.TheMarkster wrote: ↑Tue Sep 17, 2019 5:31 pmYour images don't show up. You can attach them directly by drag and drop as I have done here for you.
The lines are 10mm apart?
Edit: I deleted mine since I see you fixed your post while I was doing it.
Thanks for your time!
-
- Posts: 20
- Joined: Sat Apr 21, 2018 9:34 am
Re: Design help - irregular shape
I forgot to take a photo of inner side. But the inner structure dont have to be precise.
Re: Design help - irregular shape
Here is something to get you started:
.
.
- Attachments
-
- PlasticPart.FCStd
- (615.91 KiB) Downloaded 43 times
-
- Posts: 20
- Joined: Sat Apr 21, 2018 9:34 am