Feature Request: Sketcher Copy Carbon with Offsets.

Have some feature requests, feedback, cool stuff to share, or want to know where FreeCAD is going? This is the place.
Forum rules
Be nice to others! Read the FreeCAD code of conduct!
Post Reply
User avatar
jruiz
Posts: 479
Joined: Tue Oct 28, 2014 1:07 pm
Contact:

Feature Request: Sketcher Copy Carbon with Offsets.

Post by jruiz »

What do think about having the option of setting offsets to sketcher copy carbon?
I have uploaded many FreeCAD video tutorials to my YouTube channel
openBrain
Veteran
Posts: 9034
Joined: Fri Nov 09, 2018 5:38 pm
Contact:

Re: Feature Request: Sketcher Copy Carbon with Offsets.

Post by openBrain »

I think you should consider existing topics. :P
https://forum.freecadweb.org/viewtopic.php?f=8&t=39269
User avatar
jruiz
Posts: 479
Joined: Tue Oct 28, 2014 1:07 pm
Contact:

Re: Feature Request: Sketcher Copy Carbon with Offsets.

Post by jruiz »

openBrain wrote: Fri Sep 20, 2019 2:39 pm I think you should consider existing topics. :P
https://forum.freecadweb.org/viewtopic.php?f=8&t=39269
Indeed, my request seems to be (almost) the same as that of GlouGlou.

But It seems to me too that what GlouGlou is requesting in
https://forum.freecadweb.org/viewtopic.php?f=8&t=39269
and what is set in
https://freecadweb.org/tracker/view.php?id=3708
is not the same thing.
Or is it?
I have uploaded many FreeCAD video tutorials to my YouTube channel
openBrain
Veteran
Posts: 9034
Joined: Fri Nov 09, 2018 5:38 pm
Contact:

Re: Feature Request: Sketcher Copy Carbon with Offsets.

Post by openBrain »

For me that's the same. For others this isn't. And I can't prove I'm right. :)
However as I said in the other discussion, the main coding effort is to get offset curves to work. Then that the source is same sketch or another will be IMO quite simple.
So I encourage you to continue on the topic I pointed (as it is officially linked to the ticket) to add and eventually discuss your variant. ;)
User avatar
jruiz
Posts: 479
Joined: Tue Oct 28, 2014 1:07 pm
Contact:

Re: Feature Request: Sketcher Copy Carbon with Offsets.

Post by jruiz »

openBrain wrote: Fri Sep 20, 2019 3:02 pm For me that's the same. For others this isn't. And I can't prove I'm right. :)
However as I said in the other discussion, the main coding effort is to get offset curves to work. Then that the source is same sketch or another will be IMO quite simple.
So I encourage you to continue on the topic I pointed (as it is officially linked to the ticket) to add and eventually discuss your variant. ;)
Ok. I'll do it.
Regards.
I have uploaded many FreeCAD video tutorials to my YouTube channel
Post Reply