Design help - irregular shape

Post here for help on using FreeCAD's graphical user interface (GUI).
Forum rules
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help

Also, be nice to others! Read the FreeCAD code of conduct!
rosparovac
Posts: 20
Joined: Sat Apr 21, 2018 9:34 am

Design help - irregular shape

Postby rosparovac » Tue Sep 17, 2019 3:18 pm

Hello everyone
I recently bought an electric car and found that simply cutting a piece of plastic can unlock bonus transfers More information here. Unfortunately, the original part is unreachable and if you can get it at a nonsense price (140EUR). I want to create it and share to thinginverse to help EV comunity. But this shape its so iregural that I dont know where to start.

Can you give me some hints?
Or the sequence to design it?

Image
Image
Image
Image
Image
TheMarkster
Posts: 1060
Joined: Thu Apr 05, 2018 1:53 am

Re: Design help - irregular shape

Postby TheMarkster » Tue Sep 17, 2019 5:31 pm

rosparovac wrote:
Tue Sep 17, 2019 3:18 pm
Hello everyone
Your images don't show up. You can attach them directly by drag and drop as I have done here for you.

The lines are 10mm apart?

Edit: I deleted mine since I see you fixed your post while I was doing it.
rosparovac
Posts: 20
Joined: Sat Apr 21, 2018 9:34 am

Re: Design help - irregular shape

Postby rosparovac » Tue Sep 17, 2019 6:27 pm

TheMarkster wrote:
Tue Sep 17, 2019 5:31 pm
rosparovac wrote:
Tue Sep 17, 2019 3:18 pm
Hello everyone
Your images don't show up. You can attach them directly by drag and drop as I have done here for you.

The lines are 10mm apart?

Edit: I deleted mine since I see you fixed your post while I was doing it.
Lines are 8mm apart.
Thanks for your time!
rosparovac
Posts: 20
Joined: Sat Apr 21, 2018 9:34 am

Re: Design help - irregular shape

Postby rosparovac » Thu Sep 19, 2019 7:15 pm

I forgot to take a photo of inner side. But the inner structure dont have to be precise.
Image
kisolre
Posts: 1360
Joined: Wed Nov 21, 2018 1:13 pm

Re: Design help - irregular shape

Postby kisolre » Fri Sep 20, 2019 1:45 pm

Here is something to get you started:
.
PlasticPart.JPG
PlasticPart.JPG (87.61 KiB) Viewed 182 times
Attachments
PlasticPart.FCStd
(615.91 KiB) Downloaded 11 times
rosparovac
Posts: 20
Joined: Sat Apr 21, 2018 9:34 am

Re: Design help - irregular shape

Postby rosparovac » Sun Sep 22, 2019 12:51 pm

kisolre wrote:
Fri Sep 20, 2019 1:45 pm
Here is something to get you started:
.
PlasticPart.JPG
Thank you!