How Do I Route an Edge?
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
How Do I Route an Edge?
Is there a way that IO can route sketch002 about the left, front and right side of the Additive Loft? Or is there another way to get the same result?
- Attachments
-
- test.FCStd
- (12.21 KiB) Downloaded 22 times
- papyblaise
- Veteran
- Posts: 7864
- Joined: Thu Jun 13, 2019 4:28 pm
- Location: France
Re: How Do I Route an Edge?
Hello
you have to mape the arc on the green face and Pocket , and miror
you have to mape the arc on the green face and Pocket , and miror
- Attachments
-
- anvil.PNG (19.25 KiB) Viewed 743 times
Re: How Do I Route an Edge?
Hi.. Thanks you for replying. What I need, though, is for that profile cut from the front face as well as the two sides. Is that possible?papyblaise wrote: ↑Wed Oct 02, 2019 8:04 am Hello
you have to mape the arc on the green face and Pocket , and miror
- pl7i92LCNC
- Posts: 208
- Joined: Tue Mar 12, 2019 3:03 pm
- Location: RLP DE
Re: How Do I Route an Edge?
the front face woudt be a second sketch
mirroring is not the best you can simply draw the 2 shapes on one sketch
mirroring is not the best you can simply draw the 2 shapes on one sketch
Re: How Do I Route an Edge?
OK... so there's no simple, one-step process for something like this similar to the [Follow Me] tool in Sketchup? I know people hate that program, but man a lot of things are easier in Sketchup! Thanks.pl7i92LCNC wrote: ↑Wed Oct 02, 2019 5:13 pm the front face woudt be a second sketch
mirroring is not the best you can simply draw the 2 shapes on one sketch
Re: How Do I Route an Edge?
OK... I figured it out. Maybe I shouldn't CAD and drink
I created a second sketch as a path around the object and did a [Subtractive Pipe] along the second path. Thanks everyone for your help.
I created a second sketch as a path around the object and did a [Subtractive Pipe] along the second path. Thanks everyone for your help.
- pl7i92LCNC
- Posts: 208
- Joined: Tue Mar 12, 2019 3:03 pm
- Location: RLP DE
Re: How Do I Route an Edge?
FreeCAD is Not sketchup it is a real construction OpenSource CAD system