Part->Chamfer does not work
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
Part->Chamfer does not work
Hi!
I imported a contour from SVG. Further, I extruded the contour. All is ok.
I want to make a chamfer, but it does not work! Why does it not work?
OS: Linux Mint 18.1 Serena
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.18.16093 (Git)
Build type: Release
Branch: releases/FreeCAD-0-18
Hash: 690774c0effe4fd7b8d2b5e2fb2b8c8d145e21ce
Python version: 2.7.12
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: English/UnitedKingdom (en_GB)
I imported a contour from SVG. Further, I extruded the contour. All is ok.
I want to make a chamfer, but it does not work! Why does it not work?
OS: Linux Mint 18.1 Serena
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.18.16093 (Git)
Build type: Release
Branch: releases/FreeCAD-0-18
Hash: 690774c0effe4fd7b8d2b5e2fb2b8c8d145e21ce
Python version: 2.7.12
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: English/UnitedKingdom (en_GB)
- Attachments
-
- rat4.FCStd
- (23.7 KiB) Downloaded 61 times
- DeepSOIC
- Veteran
- Posts: 7896
- Joined: Fri Aug 29, 2014 12:45 am
- Location: used to be Saint-Petersburg, Russia
Re: Part->Chamfer does not work
Because OpenCascade kernel can't do it for some reason. So far, I have not been able to figure out, what exactly is tripping it up, but it happens all over the shape - I had no success chamfering sliced-apart pieces of the shape.
- pl7i92LCNC
- Posts: 208
- Joined: Tue Mar 12, 2019 3:03 pm
- Location: RLP DE
Re: Part->Chamfer does not work
on the left foot there is a Face missmatch as a non solved svg i guess
dxf export saying non connected there
dxf export saying non connected there
Re: Part->Chamfer does not work
Where is it? I do not see this...pl7i92LCNC wrote: ↑Tue Oct 08, 2019 5:33 pm on the left foot there is a Face missmatch as a non solved svg i guess
dxf export saying non connected there
Re: Part->Chamfer does not work
It is so sad... And what will you advise to me? I need a small chamfer...
- Hannu
- Posts: 130
- Joined: Fri Sep 11, 2015 4:12 pm
- Location: Strängnäs, Sweden - 1hr drive west from Stockholm
Re: Part->Chamfer does not work
Quick recreation using splines, no go.
OS: Ubuntu 16.04.6 LTS
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.18.16093 (Git)
Build type: Release
Branch: releases/FreeCAD-0-18
Hash: 690774c0effe4fd7b8d2b5e2fb2b8c8d145e21ce
Python version: 2.7.12
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: English/UnitedStates (en_US)
OS: Ubuntu 16.04.6 LTS
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.18.16093 (Git)
Build type: Release
Branch: releases/FreeCAD-0-18
Hash: 690774c0effe4fd7b8d2b5e2fb2b8c8d145e21ce
Python version: 2.7.12
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: English/UnitedStates (en_US)
- Attachments
-
- rat4+.FCStd
- (39.94 KiB) Downloaded 52 times
/Hannu - engineer & mild
- Embedded, Computer, Software, Electronic, Fault analysis. A&D Photography http://flickr.com/arkane
- Mechanics, FDM 3D-prints, Solder, Lathe, Mill, Weld -work. ISO Audits, Claim, Deviation, Corrective action
- Embedded, Computer, Software, Electronic, Fault analysis. A&D Photography http://flickr.com/arkane
- Mechanics, FDM 3D-prints, Solder, Lathe, Mill, Weld -work. ISO Audits, Claim, Deviation, Corrective action
- pl7i92LCNC
- Posts: 208
- Joined: Tue Mar 12, 2019 3:03 pm
- Location: RLP DE
Re: Part->Chamfer does not work
the fillet is no problem the FC is it
this is STL made by 5 klicks in Blender3D from the SVG- DeepSOIC
- Veteran
- Posts: 7896
- Joined: Fri Aug 29, 2014 12:45 am
- Location: used to be Saint-Petersburg, Russia
Re: Part->Chamfer does not work
Well, I'd say it kinda works. PartDesign Chamfer (1mm) produces a good looking result, but it fails BOPCheck with a few self-intersection errors. Bizarrely, Part Chamfer yields a different result, where the top face is missing, and there is a visible glitch in chamfered face. So I now come to a strange conclusion, that before giving up on Part chamfer/fillet, I should try PartDesign's one too.
OS: Windows 10 (10.0)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.18234 (Git)
Build type: Release
Branch: master
Hash: 3af5d97e9b2a60823815f662aba25422c4bc45bb
Python version: 3.6.8
Qt version: 5.12.1
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: Russian/Russia (ru_RU)
- pl7i92LCNC
- Posts: 208
- Joined: Tue Mar 12, 2019 3:03 pm
- Location: RLP DE
Re: Part->Chamfer does not work
cool outcome DEEP
exactly what he liked to adchive
exactly what he liked to adchive