hello
you do not have the right version of sheetmetal ; or
do you have to erase the sketch that contains the fold lines
I have merged your topics. Please refrain from posing the same questions at the same time in different topics.andrigtmiller wrote: ↑Tue Oct 15, 2019 5:17 amNo bend lines coming out on my unfold of a sheet metal project
I have the latest version of sheetmetal, its version 0.2.31papyblaise wrote: ↑Tue Oct 15, 2019 5:56 amhello
you do not have the right version of sheetmetal ; or
do you have to erase the sketch that contains the fold lines
You get them if you have checked "Generate projection sketch".
The reason I started a new topic, was because my original problem was solved, and now I had a new problem with bend lines. By merging this with the old thread, the topic is no longer correct. I can unfold now, but I don't get the bend lines. So, your merging my topic with the old one, isn't really helpful to let people know what my problem is anymore.chrisb wrote: ↑Tue Oct 15, 2019 6:41 amI have merged your topics. Please refrain from posing the same questions at the same time in different topics.andrigtmiller wrote: ↑Tue Oct 15, 2019 5:17 amNo bend lines coming out on my unfold of a sheet metal project
From what I can see in the image you posted, not all the bend lines seem to be visible. This is beyond frustrating, as I have tried to even rebuild this several times. It just doesn't work for me.pl7i92LCNC wrote: ↑Wed Oct 16, 2019 4:50 pmunfold workes fine wit the appimage
FreeCAD_0.19-18353-Linux-Conda_Py3Qt5_glibc2.12-x86_64.AppImage
the file is unfolded with the Bottom outer face selected
and by pressing the unfold key in the topbar
Bend lines are visible
unfold.jpgFuelCell.FCStd