Problem to make complex object
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
Problem to make complex object
Hello all,
I use Freecad since 2 month ago, I have learned many things, but I have a problem to create a complexe object. I don't know how can I make this object.
I have tested to make a different sketch in different height, and use the button "sweep", but after that I don't know how to continue.
Thank you in advance, and have a good day all.
I use Freecad since 2 month ago, I have learned many things, but I have a problem to create a complexe object. I don't know how can I make this object.
I have tested to make a different sketch in different height, and use the button "sweep", but after that I don't know how to continue.
Thank you in advance, and have a good day all.
Re: Problem to make complex object
Hi and welcome to the forum!
It seems you are working in Part workbench. There you can use Draft->Array in its polar form to multiply the pillar.
It seems you are working in Part workbench. There you can use Draft->Array in its polar form to multiply the pillar.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Problem to make complex object
Yes, but when I have used the array,when pilliar touch an another pilliar, it's not rounded between. I don't know how make this rounded form...
Re: Problem to make complex object
It's not rounded because the pillar doesn't end horizontally.
If the ends of the walls can be rounded you could model the arc instead of the pillar and add fillets.
If the ends of the walls can be rounded you could model the arc instead of the pillar and add fillets.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Problem to make complex object
If you had to make this object, how would you do it ? And how would you do begin
- microelly2
- Veteran
- Posts: 4688
- Joined: Tue Nov 12, 2013 4:06 pm
- Contact:
Re: Problem to make complex object
I use a BSpline surface with a pin and make a transformation of the poles
which maps the rectangle base grid to a arc sector
then apply Draft polar Array
which maps the rectangle base grid to a arc sector
then apply Draft polar Array
Re: Problem to make complex object
Hmmm, thank you to your help, but I think that it's a hard method to make my object with your method
- papyblaise
- Veteran
- Posts: 7872
- Joined: Thu Jun 13, 2019 4:28 pm
- Location: France
Re: Problem to make complex object
Hello
Maybe the best solution is draw only one arche (the grey one) and array 12 times and finish whith the base
Maybe the best solution is draw only one arche (the grey one) and array 12 times and finish whith the base
- Attachments
-
- crone.FCStd
- (418.37 KiB) Downloaded 28 times
-
- crone.PNG (65.52 KiB) Viewed 1267 times
Re: Problem to make complex object
… how about that:
- Attachments
-
- Arcade.FCStd
- (122.67 KiB) Downloaded 29 times
Re: Problem to make complex object
Thank you PapyBlaise et Hammax, your messages help me a lot ! It's exactly what i need