[Solved] Wrong orientations,... in DetailView

[IngoMeier]

Solved with version 0.19.18620

Hi!
Seems to be similiar to (or same as):
Problems with DetailView (False Dimension) -> PR1786
[Solved] problems with DetailView -> git commit d48d014eb9
but still not solved (or back) in Version: 0.18.16131 (Git) or in Version: 0.19.18542 (Git)

Test_DetailView2.png (197.22 KiB) Viewed 1544 times

Only Detail of Front and Detail6 of Bottom are ok.

Changing Rotation and Direction seems to have no (visible) effect.

Thanks,
Ingo

Test_DetailView2.FCStd

(54.65 KiB) Downloaded 23 times

OS: Windows 10
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.18.16131 (Git)
Build type: Release
Branch: releases/FreeCAD-0-18
Hash: 3129ae4296e40ed20e7b3d460b86e6969acbe1c3
Python version: 3.6.6
Qt version: 5.6.2
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: German/Germany (de_DE)

[chrisb]

Can you verify if it's solved in 0.19?

[IngoMeier]

Hi Chris,

just tried with Version: 0.19.18542 (Git) -> it is the same.
Even recreated some DetailViews and made changes in the Sketch. -> still wrong

It is the 0.19_pre version of FreeCAD. Or did you have another Version in mind?
If yes, where to find it?

Thanks,
Ingo

[chrisb]

That's the version I had in mind.

[wandererfan]

Seems to be similiar to (or same as):

Should be fixed by git commit 789733d691

DetailOrientationDPG.png (52.3 KiB) Viewed 1387 times

[IngoMeier]

Hi Chris,

thank you very much!

Will this go into 0.18.4 and 0.19?


Thanks,
Ingo

[chrisb]

Hi Chris,

thank you very much!

Herewith I forward your thanks to Master Of TechDraw wandererfan.

[IngoMeier]

By "Chris" I mainly meant wandererfan. (But take the thanks for your work too!)
Isn't "Chris" his Name?

Found it here:
https://forum.freecadweb.org/viewtopic. ... 474#p25474

[chrisb]

I hadn't realized that he got one of these seldom used fantastic names.

[wandererfan]

Will this go into 0.18.4 and 0.19?

It is in the master source code for 0.19 now. Any v0.19 executables built from here on should include it.

Should be possible to back port to 18, but I'll have to look.

To Wiser Heads: does this meet the criteria for backports?