I noticed a small problem with TechDraw sections. It's a bit difficult to explain, so I made video about the problem. Basically the section view cannot extend beyond the body's original bounding box, and if you rotate the body, the bounding box is not rotated, which generally gives you too tight limits for the section line positions. Sorry about the bad quality in the video, but the forum won't allow files over 1 MB.
The following error is displayed, even though the section definitely intersects the part:
Code: Select all
DVS: SectionOrigin doesn't intersect part in DrawViewSection
DVS: Using center of bounding box.
EDIT: I forgot to attach the FCStd file, but it should be attached now. In the file, there is a section, which has origin (5,5,10). If you'll try to increase the z-value to 11, it jumps to 5 (the center of the original bounding box), even though there would clearly be room to increase the z-coordinate of the origin to 14.1... Anything bigger than 10, which is the z-coordinate of the original bounding box, resets the value to the center.
OS: Debian GNU/Linux bullseye/sid (KDE//usr/share/xsessions/plasma)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.18696 (Git)
Build type: Unknown
Branch: master
Hash: dd120ef5075353580090dd385c235b4c74433745
Python version: 3.7.5
Qt version: 5.12.5
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: English/United States (en_US)