Big merge day
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
Re: Big merge day
When do you plan to merge ?
I want to test it !
I want to test it !
Re: Big merge day
The assembly module is starting to get usable now so i would also like to see a merge
Re: Big merge day
no news about merge day ?
-
- Posts: 2
- Joined: Mon Sep 16, 2013 3:31 pm
Re: Big merge day
Hi there. I downloaded the nightly and the Assembly moduled had nothing, are you working with internal builds?
Re: Big merge day
We are working with the git version control system. Currently you have to checkout the assembly branch and compile yourself to get access to the module. See the sourceforge page for git access.
Re: Big merge day
hey, I've grabbed dev-assembly, and compiled just fine using the instructions.
Can I get any hints as to how the assembly module works? Maybe a quick couple of lines about how it's intended that an assembly is made?
I have a Assembly1->Product->Parts, then import another project with lots of parts, but how do I associate existing parts and relate them?
When I try the PartDesign boolean operation to fuse a Body object with a Part object, I get an error about "Cannot do boolean operation with invalid base feature".
What am I missing?
Thanks!
Alan
Can I get any hints as to how the assembly module works? Maybe a quick couple of lines about how it's intended that an assembly is made?
I have a Assembly1->Product->Parts, then import another project with lots of parts, but how do I associate existing parts and relate them?
When I try the PartDesign boolean operation to fuse a Body object with a Part object, I get an error about "Cannot do boolean operation with invalid base feature".
What am I missing?
Thanks!
Alan
Re: Big merge day
OK, searching through more of the forum I came across this:
viewtopic.php?f=8&t=4193&hilit=assembly#p32891
I'm a little fuzzy about what's supposed to happen once you double click on the body of a part.
Is there some additional step to associate or convert a part?
viewtopic.php?f=8&t=4193&hilit=assembly#p32891
I'm a little fuzzy about what's supposed to happen once you double click on the body of a part.
Is there some additional step to associate or convert a part?
switch to assembly workbench. That should create a initial product which is active (violet background in tree).
In this product you can add parts and products. double click on the Body of a part will get you into the PartDesign workbench, where you can add geometry. After that go back to assembly by double click a product.
After adding geometry you can add constraints for the active product to order the parts.
Re: Big merge day
Hello,
parts can only hold bodys. That means that old freecad projects which don't have the body feature can not be put into a part. Jan wrote a conversion tool for that purpose, but that has not been merged yet. If you have a body outside a part and want to add it to a part, you currently need to use the python console. Look at the output of the gui "add part" command to see how it's done.
Jan wrote also a nice tutorial on how to use the new part design features, have a look at http://freecadweb.org/wiki/index.php?ti ... Tutorial_I . If you double click the body inside the part you can model anything you want, it will be grouped beneath the body feature (thats the purpose of it).
To assemble stuff you need multiple parts. than you can select any geometrie on two different parts (maybe two faces) and hit the constraint button (e.g. coincident). I started writing a tutorial, but it's not exceeded the theoretical basics, so not too useful up to now. http://www.freecadweb.org/wiki/index.ph ... c_Tutorial Just remember it's draft, pictures are inconsitent etc.
Because of the mentioned shortcommings the workbench is not realy easy usable up to now, but if you still go on testing I would like to hear you opinion about the constraints and solver part. Dos it work as expected? Dos anything solve as it should?
Stefan
parts can only hold bodys. That means that old freecad projects which don't have the body feature can not be put into a part. Jan wrote a conversion tool for that purpose, but that has not been merged yet. If you have a body outside a part and want to add it to a part, you currently need to use the python console. Look at the output of the gui "add part" command to see how it's done.
Jan wrote also a nice tutorial on how to use the new part design features, have a look at http://freecadweb.org/wiki/index.php?ti ... Tutorial_I . If you double click the body inside the part you can model anything you want, it will be grouped beneath the body feature (thats the purpose of it).
To assemble stuff you need multiple parts. than you can select any geometrie on two different parts (maybe two faces) and hit the constraint button (e.g. coincident). I started writing a tutorial, but it's not exceeded the theoretical basics, so not too useful up to now. http://www.freecadweb.org/wiki/index.ph ... c_Tutorial Just remember it's draft, pictures are inconsitent etc.
Because of the mentioned shortcommings the workbench is not realy easy usable up to now, but if you still go on testing I would like to hear you opinion about the constraints and solver part. Dos it work as expected? Dos anything solve as it should?
Stefan
Re: Big merge day
This sounds like you trust your own solver not at allDos anything solve as it should?