Curves workbench
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
Re: Curves workbench
… abused your frame sketch picture,
built a new frame by a 7-control-point Sketcher BSpline
Scaled 2 clones and made a Loft.
If the frames are "smooth" the hull also will be.
built a new frame by a 7-control-point Sketcher BSpline
Scaled 2 clones and made a Loft.
If the frames are "smooth" the hull also will be.
- Attachments
-
- Gord_Loft.FCStd
- (30.31 KiB) Downloaded 75 times
Re: Curves workbench
… and here a possible workflow.
Different frame sketches.
Also with a final Gordon surface.
Different frame sketches.
Also with a final Gordon surface.
- Attachments
-
- Gord_Loft_3.FCStd
- (12 KiB) Downloaded 93 times
-
- Gord_Loft_2.FCStd
- (63.13 KiB) Downloaded 73 times
Last edited by hammax on Sun Jan 12, 2020 7:24 am, edited 2 times in total.
Re: Curves workbench
A idea:
Why not use isocurve to make points instead a mesh. (should be an option)
With theses points, we will able to rebuild a new surface (smoothed?) and mix several cloud points to create a new mixed surface with the approximate feature.
...
and thank you for the new feature Line.
Why not use isocurve to make points instead a mesh. (should be an option)
With theses points, we will able to rebuild a new surface (smoothed?) and mix several cloud points to create a new mixed surface with the approximate feature.
...
and thank you for the new feature Line.
Re: Curves workbench
@Will_C, dont hesitate to share your progress about fuselage to the thread of best practice, i guess it can help other too "Best practice: fuselage + wing" : https://forum.freecadweb.org/viewtopic. ... 14#p363614
@hammax thank you for your file "Gord_Loft_2" very helpful ! Dummie question, but in this file, do you know a possibility to get a solid from the Gordon or Gordon_mirr objects ?
@Chris_G : fantastic job, lot of gratitude !
@hammax thank you for your file "Gord_Loft_2" very helpful ! Dummie question, but in this file, do you know a possibility to get a solid from the Gordon or Gordon_mirr objects ?
@Chris_G : fantastic job, lot of gratitude !
-
- Veteran
- Posts: 7790
- Joined: Tue Jan 07, 2014 11:10 am
- Contact:
Re: Curves workbench
Hi Chris,Chris_G wrote:Ping
Please look at Blend Curve. The end of the curve is not at the edge, but offset on the surface. This looks like a mistake. Maybe you can look for this feature request at this time:
Best regards
Wilfried
Code: Select all
OS: Ubuntu 18.04.3 LTS (XFCE/xubuntu)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.
Build type: Release
Python version: 3.6.9
Qt version: 5.9.5
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: German/Germany (de_DE)
27.01.2020
Re: Curves workbench
This should be fixed now.freecad-heini-1 wrote: ↑Mon Jan 27, 2020 9:10 pm Please look at Blend Curve. The end of the curve is not at the edge, but offset on the surface. This looks like a mistake.
Re: Curves workbench
I added a new tool : Multi-Loft
The goal is to loft "multi-face" objects like shapestrings.
The goal is to loft "multi-face" objects like shapestrings.
-
- Veteran
- Posts: 7790
- Joined: Tue Jan 07, 2014 11:10 am
- Contact:
Re: Curves workbench
Thank you very much Chris, and whow, a new Feature to play with.
What about my feature request / wish for to improve the blend curve?:
https://peertube.mastodon.host/videos/w ... 9f8a5510d0
What about my feature request / wish for to improve the blend curve?:
https://peertube.mastodon.host/videos/w ... 9f8a5510d0
Re: Curves workbench
I have more and more the feeling that this workbench should be part of core FreeCAD!
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.