How To Edit STL Files In FreeCAD 0.18

A place to share learning material: written tutorials, videos, etc.
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Post Reply
AllVisuals4U
Posts: 13
Joined: Sat Jul 22, 2017 2:18 pm
Contact:

How To Edit STL Files In FreeCAD 0.18

Post by AllVisuals4U »

Hello FreeCAD community,

I made a video about editing (downloaded) STL files in FreeCAD 0.18.
This video shows the method to cut out shapes of an STL file with the Part and Sketcher workbench.

https://youtu.be/5lwENZeNiNg
AllVisuals4U
Learn To Design | 3D Printing, Design & Lifehacks
YouTube https://youtube.com/AllVisuals4U
LBRY https://lbry.tv/@AllVisuals4U:7
BitTube https://bittube.tv/profile/AllVisuals4U
vocx
Veteran
Posts: 5197
Joined: Thu Oct 18, 2018 9:18 pm

Re: How To Edit STL Files In FreeCAD 0.18

Post by vocx »

AllVisuals4U wrote: Fri Feb 14, 2020 6:37 pm I made a video about editing (downloaded) STL files in FreeCAD 0.18.
Nice. I will add your video to the video tutorials page. Many of your videos are listed there.

You have some "general" videos made for v0.16. If you can update them to v0.18 or v0.19 that would be ideal as we would like to phase out videos made with v0.16. FreeCAD 0.17 has a new PartDesign Workbench, so we prefer videos made with 0.17 and above.
Always add the important information to your posts if you need help. Also see Tutorials and Video tutorials.
To support the documentation effort, and code development, your donation is appreciated: liberapay.com/FreeCAD.
AllVisuals4U
Posts: 13
Joined: Sat Jul 22, 2017 2:18 pm
Contact:

Re: How To Edit STL Files In FreeCAD 0.18

Post by AllVisuals4U »

Thanks a lot for putting my videos there!
I think i will let the old 0.16 general videos for what they are: they're not the kind of videos i want to make anymore.
My newer (3D modeling) videos will cover some of the general subjects and features i showed in my older videos.
AllVisuals4U
Learn To Design | 3D Printing, Design & Lifehacks
YouTube https://youtube.com/AllVisuals4U
LBRY https://lbry.tv/@AllVisuals4U:7
BitTube https://bittube.tv/profile/AllVisuals4U
Post Reply