How to assemble to have dynamic changes?

Discussion about the development of the Assembly workbench.
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Post Reply
Grunert
Posts: 6
Joined: Sun Feb 16, 2020 2:16 am

How to assemble to have dynamic changes?

Post by Grunert »

Hello =)
I am using A2Plus for the assembly of sub assemblies.
However I did need to change one part but sadly the new distance did not change in the assemblies resulting in having to change everything again.

Is there a workaround to get the updates of a part into the assembly
or is there a way to create a dynamic link between the part and assembly?

Thx =)
(probably same for drawing then...)
As FreeCAD is so powerful I cant imagine that there is no way for this, probably just me and unexpierenced

OS: Windows 7
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.18.4 (GitTag)
Build type: Release
Branch: releases/FreeCAD-0-18
Hash: 980bf9060e28555fecd9e3462f68ca74007b70f8
Python version: 3.6.6
Qt version: 5.6.2
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: German/Germany (de_DE)
Turro75
Posts: 179
Joined: Mon Aug 15, 2016 10:23 pm

Re: How to assemble to have dynamic changes?

Post by Turro75 »

Hi,

try the reload button
Immagine.png
Immagine.png (12.02 KiB) Viewed 951 times
Grunert
Posts: 6
Joined: Sun Feb 16, 2020 2:16 am

Re: How to assemble to have dynamic changes?

Post by Grunert »

With a simple test it is working... at the complex assembly it was not.
Lets try again in the future ;)
Grunert
Posts: 6
Joined: Sun Feb 16, 2020 2:16 am

Re: How to assemble to have dynamic changes?

Post by Grunert »

With a simple test it is working... at the complex assembly it was not.
Lets try again in the future ;)
Post Reply