Sweep error: TopoDS shell [Solved]

[Brutha]

Hi All,

I'm getting an error when I try and sweep a circle along what I thought was a fairly simple path. It happens when I add the curved edge in the picture below.

Can anyone suggest what the cause might be? System info below and file attached.

Thanks!

Brutha

Screenshot 2020-03-07 at 16.55.59.png (29.16 KiB) Viewed 1981 times

Code: Select all

OS: macOS Mojave (10.14)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.19405 (Git)
Build type: Release
Branch: master
Hash: d2b943e8b7d8fe2673a4e20671b6cb0f8180fdbd
Python version: 3.8.1
Qt version: 5.12.5
Coin version: 4.0.0
OCC version: 7.4.0
Locale: C/Default (C)

[Roy_043]

The attachment of Sketch128 is the problem. Also that sketch is not fully constrained.

[Brutha]

Thanks Roy, will have a play with those settings!

[papyblaise]

Indeed place the sketch at 465 instead of 466 and all is Ok , because the start of the path is at 465.67, and the handle auto-intersect itself because the angle is less 90°