Apparent intersections on a sketch
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
-
- Posts: 23
- Joined: Wed Jul 01, 2020 8:15 am
Apparent intersections on a sketch
https://ibb.co/smrBJwJ
Is there a constraint so that the end of the line intersects the apparent edge ?
Thank you
Is there a constraint so that the end of the line intersects the apparent edge ?
Thank you
Last edited by niceandeasy on Wed Jul 01, 2020 8:34 am, edited 1 time in total.
Re: Apparent intersections on a sketch
Welcome to the forum!
I'm not exactly sure what you need. Are you familiar with construction lines and linking external geometry functions?
https://wiki.freecadweb.org/Sketcher_ToggleConstruction
https://wiki.freecadweb.org/Sketcher_External
I'm not exactly sure what you need. Are you familiar with construction lines and linking external geometry functions?
https://wiki.freecadweb.org/Sketcher_ToggleConstruction
https://wiki.freecadweb.org/Sketcher_External
-
- Posts: 23
- Joined: Wed Jul 01, 2020 8:15 am
Re: Apparent intersections on a sketch
Thank you for the reply, please see the image in the link of my post
Following the second link you provided I think I need to use the sketch external geometry tool.
Solved, thanks again !
Cheers
Following the second link you provided I think I need to use the sketch external geometry tool.
Solved, thanks again !
Cheers
Re: Apparent intersections on a sketch
OK, I got it now. I don't think FreeCAD has that function, but I do not know many things. You might have to use construction line to simulate it unless someone with more knowledge steps in.
- Attachments
-
- edge.FCStd
- (9.28 KiB) Downloaded 15 times
-
- Posts: 23
- Joined: Wed Jul 01, 2020 8:15 am
Re: Apparent intersections on a sketch
With the external geometry (X shortcut) you suggested and clicking on the edges on the base of the part I was able to create horizontal reference lines to which I could apply restrictions and dimensions
https://ibb.co/9hX4zS2
It's curious that the image insertion does not seems to be working so I am posting the direct link to the image
Thanks again
https://ibb.co/9hX4zS2
It's curious that the image insertion does not seems to be working so I am posting the direct link to the image
Thanks again
- Attachments
-
- Image2.jpg (102.64 KiB) Viewed 657 times
Last edited by niceandeasy on Wed Jul 01, 2020 10:24 am, edited 2 times in total.
Re: Apparent intersections on a sketch
Did you upload the image as an attachment to the post? It should workniceandeasy wrote: ↑Wed Jul 01, 2020 10:01 am [..]It's curious that the image insertion does not seems to be working so I am posting the direct link to the image[..]
-
- Posts: 23
- Joined: Wed Jul 01, 2020 8:15 am
Re: Apparent intersections on a sketch
Ahh OK as an attachment it worked
Re: Apparent intersections on a sketch
I may add, that it is possible to use the edges as external geometry, but it is not recommended. You should rather use references to sketches to minimize the problems caused by the topological naming problem.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
-
- Posts: 23
- Joined: Wed Jul 01, 2020 8:15 am
Re: Apparent intersections on a sketch
Thank you !