if i take your file and copy the wall with part simple copy, i can create a correct ifc from it.
Open Source House with Open Source CAD?
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
- thomas-neemann
- Veteran
- Posts: 11921
- Joined: Wed Jan 22, 2020 6:03 pm
- Location: Osnabrück DE 🇩🇪
- Contact:
Re: Open Source House with Open Source CAD?
if i take your file and copy the wall with part simple copy, i can create a correct ifc from it.
- Attachments
-
- Bildschirmfoto vom 2020-07-31 04-29-10.png (117.3 KiB) Viewed 1404 times
-
- simple-copy.ifc
- (4.91 KiB) Downloaded 39 times
- thomas-neemann
- Veteran
- Posts: 11921
- Joined: Wed Jan 22, 2020 6:03 pm
- Location: Osnabrück DE 🇩🇪
- Contact:
Re: Open Source House with Open Source CAD?
here is a proposal for a quick wall construction based on an ifc file. as a result an ifc file
edit
here the file from the video (not very precise, just as an example)
edit
here the file from the video (not very precise, just as an example)
- thomas-neemann
- Veteran
- Posts: 11921
- Joined: Wed Jan 22, 2020 6:03 pm
- Location: Osnabrück DE 🇩🇪
- Contact:
Re: Open Source House with Open Source CAD?
with part compound and draft move, the position in the room in the fcstd file could be quickly corrected
- Attachments
-
- wall2-rev1.ifc
- (23.3 KiB) Downloaded 50 times
- thomas-neemann
- Veteran
- Posts: 11921
- Joined: Wed Jan 22, 2020 6:03 pm
- Location: Osnabrück DE 🇩🇪
- Contact:
Re: Open Source House with Open Source CAD?
A big advantage with 3D planning is the determination of earth masses. in freecad this is very quick and easy. in this example, 285 m3 of soil must be removed
- Attachments
-
- Bildschirmfoto vom 2020-07-31 13-59-28.png (12.63 KiB) Viewed 1315 times
-
- Bildschirmfoto vom 2020-07-31 13-52-43.png (70.38 KiB) Viewed 1315 times
-
- Bildschirmfoto vom 2020-07-31 13-54-58.png (46.5 KiB) Viewed 1315 times
- thomas-neemann
- Veteran
- Posts: 11921
- Joined: Wed Jan 22, 2020 6:03 pm
- Location: Osnabrück DE 🇩🇪
- Contact:
Re: Open Source House with Open Source CAD?
Normally only the creator of an ifc file changes the ifc file. in my clientele, however, you also want to edit third-party ifc files. here is an example of how easy and quick it can get with freecad.
-
- Veteran
- Posts: 3157
- Joined: Sat May 20, 2017 12:06 pm
- Location: Germany
Re: Open Source House with Open Source CAD?
Added some more wooden beams/columns.
Hard to find the exact geometry. I am wondering about the
static stabilty...
Hard to find the exact geometry. I am wondering about the
static stabilty...
- thomas-neemann
- Veteran
- Posts: 11921
- Joined: Wed Jan 22, 2020 6:03 pm
- Location: Osnabrück DE 🇩🇪
- Contact:
Re: Open Source House with Open Source CAD?
wonderful, 1000 thanks, it looks very good.
- thomas-neemann
- Veteran
- Posts: 11921
- Joined: Wed Jan 22, 2020 6:03 pm
- Location: Osnabrück DE 🇩🇪
- Contact:
Re: Open Source House with Open Source CAD?
the drawings do not seem to match reality. here you can see a strong bar.
- Attachments
-
- Bildschirmfoto vom 2020-07-31 17-41-17.png (228.29 KiB) Viewed 1259 times
- thomas-neemann
- Veteran
- Posts: 11921
- Joined: Wed Jan 22, 2020 6:03 pm
- Location: Osnabrück DE 🇩🇪
- Contact:
Re: Open Source House with Open Source CAD?
for a quick 2d drawing, completed in inkskape, here is a useful download
https://drive.google.com/file/d/1YKPgAA ... 2m4bu/view
https://www.youtube.com/watch?v=ykta3cipxs8
https://drive.google.com/file/d/1YKPgAA ... 2m4bu/view
https://www.youtube.com/watch?v=ykta3cipxs8
- Attachments
-
- Bildschirmfoto vom 2020-07-31 19-14-29.png (70.77 KiB) Viewed 1245 times
Last edited by thomas-neemann on Fri Jul 31, 2020 5:21 pm, edited 1 time in total.