Roof hatching pattern for TD

Discussions about the development of the TechDraw workbench
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Post Reply
User avatar
ragohix769
Posts: 565
Joined: Sat Jul 18, 2020 7:04 am
Location: Rome - Italy

Roof hatching pattern for TD

Post by ragohix769 »

I have done this roof pattern to share, it's ready to be used in TD.

[here you have 4 orientation of the roof patterns because TD cannot make any angle orientation on hatching patterns :-( that's could be a very useful feature request in TD ]
Attachments
tetto_mio_mat_7_SX.svg
(9.74 KiB) Downloaded 65 times
tetto_mio_mat_7_DOWN.svg
(9.75 KiB) Downloaded 64 times
tetto_mio_mat_7_DX.svg
(9.74 KiB) Downloaded 69 times
tetto_mio_mat_7.svg
(9.73 KiB) Downloaded 67 times
After #ElonMuskBuyTwitter I'm no more on Twitter, that's really enough :-(
=> Now you can find me here on #Mastodon: https://mastodon.uno/@opensoul - I hope more people do the same :-)
Post Reply