Page 1 of 5
FEA solver vs. FreeCAD FEM
Posted: Fri Jan 12, 2018 6:09 am
by bernd
EDIT: There has been a wiki page set up, which summarizes the information off this forum topic posts:
FEM_Solver
Re: supported Solver
Posted: Fri Jan 12, 2018 12:05 pm
by thschrader
dualsphysics:
-- external solver
-- uses macro from addon-manager
https://forum.freecadweb.org/viewtopic.php?f=18&t=20595
Re: supported Solver
Posted: Wed Feb 07, 2018 12:46 pm
by bernd
Re: supported Solver
Posted: Mon Apr 09, 2018 12:16 pm
by qingfeng.xia
fenics in FreeCAD
it is in development at:
https://github.com/qingfengxia/FenicsSolver
discussion in Fem Forum:
https://forum.freecadweb.org/viewtopic.php?f=37&t=22993
Tested in CFD module for heat transfer, elastic and navier stokes laminar incompressible flow.
Migrated to FEM module will happen once FenicsSolver is more stable. The case writer and mesh writer are there, can anyone help the migration and test?
Re: supported Solver
Posted: Tue Sep 18, 2018 5:26 am
by bernd
I added a wiki page about all various kind of solvers.
https://www.freecadweb.org/wiki/FEM_Solver
I remember two disscussions I'm not able to find. One was about a solver wich could calculate penetrations like a cannonball into a wall, and the other was about a FEM solver developed in Čech republic. May be some other remembers these topics better than me.
Re: supported Solver
Posted: Tue Sep 18, 2018 7:57 am
by saso
Thanks for the wiki bernd and nice to see the support for all this solvers. IMO in FOSS it is important to have a variety of choices. Here are a few more solvers for the possible future
code aster
https://www.code-aster.org/
code saturne
https://www.code-saturne.org
hermes (agros)
http://www.hpfem.org/hermes/ (
http://www.agros2d.org/)
nastran
https://github.com/nasa/NASTRAN-95
su2
https://su2code.github.io/
Re: supported Solver
Posted: Tue Sep 18, 2018 8:00 am
by polymer
bernd wrote: ↑Tue Sep 18, 2018 5:26 am
I added a wiki page about all various kind of solvers.
https://www.freecadweb.org/wiki/FEM_Solver
I remember two disscussions I'm not able to find. One was about a solver wich could calculate penetrations like a cannonball into a wall, and the other was about a FEM solver developed in Čech republic. May be some other remembers these topics better than me.
I do not know if it es from CZ or RU
http://www.impact-fem.org/
Re: supported and not supported Solver
Posted: Sun Sep 30, 2018 3:52 pm
by bernd
Re: supported Solver
Posted: Sun Sep 30, 2018 6:55 pm
by Kunda1
bernd wrote: ↑Tue Sep 18, 2018 5:26 am
I added a wiki page about all various kind of solvers.
https://www.freecadweb.org/wiki/FEM_Solver
I remember two disscussions I'm not able to find. One was about a solver wich could calculate penetrations like a cannonball into a wall, and the other was about a FEM solver developed in Čech republic. May be some other remembers these topics better than me.
Can we categorize all the FEM pages by adding them to a [[Category:FEM]] ?
Re: supported and not supported Solver
Posted: Mon Oct 01, 2018 6:43 pm
by fandaL
Object oriented finite element solver
http://www.oofem.org/