My info... COMPLETELY new to CAD with ZERO programming experience
OS: macOS 10.15
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.18.16131 (Git)
Build type: Release
Branch: (HEAD detached at 0.18.3)
Hash: 3129ae4296e40ed20e7b3d460b86e6969acbe1c3
Python version: 3.6.7
Qt version: 5.6.2
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: English/UnitedStates (en_US)
so here's the problem:
I've built a 3d representation of the hitch on my truck for use to analyze stress on a tire carrier I'm designing. I think I've got the hitch correctly built but now the GMSH in FEM won't make a mesh of it for me to even begin checking the hitch itself for any flaws.
I've attached the file below... hopefully I'm not WAY off.. this took me basically all day.
attempting to do FEM on hitch part
Moderator: bernd
Forum rules
and Helpful information for the FEM forum
and Helpful information for the FEM forum
Re: attempting to do FEM on hitch part
One day for a first part is not really bad.
The attached file is missing and I moved the post to FEM forum.
The attached file is missing and I moved the post to FEM forum.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: attempting to do FEM on hitch part
Chrisb,
thanks for the reply and moving it... I'll try again to attach the file, not sure why that didn't work
thanks for the reply and moving it... I'll try again to attach the file, not sure why that didn't work
Re: attempting to do FEM on hitch part
I'm not familiar with FEM, but your model is already in error: You start with a BaseFeature, but there is no source object to it. You should fix this and then try again with FEM.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: attempting to do FEM on hitch part
No problems here with Gmsh
done with:
But caution, don't try solving by ccx on a poor ram utilised machine!
========================== Dump contents of mesh ==========================
1) Total number of nodes: 346707
2) Total number of edges: 3681
3) Total number of faces: 90610
4) Total number of polygons: 0
5) Total number of volumes: 193056
6) Total number of polyhedrons: 0
7) Total number of linear edges: 0
8) Total number of linear faces: 0
9) Total number of linear volumes: 0
10) Total number of quadratic edges: 3681
11) Total number of quadratic faces: 90610
11.1) Number of quadratic triangles: 90610
11.2) Number of quadratic quadrangles: 0
12) Total number of quadratic volumes: 193056
12.1) Number of quadratic hexahedrons: 0
12.2) Number of quadratic tetrahedrons: 193056
12.3) Number of quadratic prisms: 0
12.4) Number of quadratic pyramids: 0
===========================================================================
done with:
OS: Windows 10 (10.0)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.18714 (Git)
Build type: Release
Branch: master
Hash: a7ad04ba4aefb486fbc5e7c68da3dd488443b08c
Python version: 3.7.3
Qt version: 5.12.5
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: German/Germany (de_DE)
Gmsh 4.4.1
But caution, don't try solving by ccx on a poor ram utilised machine!
Re: attempting to do FEM on hitch part
Chrisb and UR.... I really need baby steps here to understand how this all works. What do you mean that it was already in error? What kind of problems do I look for there? And how’d you get it to mesh???
Re: attempting to do FEM on hitch part
ChrisB is mentioning this:
When you start using GMSH Mesher. you see the window showed by UR. if you use his settings it works well
The exclamation mark means something is broken.When you start using GMSH Mesher. you see the window showed by UR. if you use his settings it works well
Re: attempting to do FEM on hitch part
i removed the BaseFeature since you use that shape twice...
Probably i broke something some where else... so just check all
Probably i broke something some where else... so just check all
- Attachments
-
- jbw_Swing_out_tire_carrier.FCStd
- (121.09 KiB) Downloaded 21 times